derayÂ®-iakt ns - DSG-Canusa

More documents

Recommendations

Info

SealingDERAY®-SPLICEMELTDERAY®-SPLICEMELT-CAPParallel- and End splicesCommonly, one of the most importantrequirements of crimped end and parallelsplices is longitudinal water blockage.At the same time, high resistanceto thermal, chemical and mechanicalstress is required. Numerous sealingapplications, especially in the automotivesector, have to meet these challenges.The environmental conditions varyand hence the needs to be met by thesealing solution.DERAY ® -SPLICEMELT, a heat shrink tubingmade of radiation cross-linked modifiedPE with a thermoplastic interioradhesive lining, meets all these requirementsperfectly.During the shrink process, the tubingrecovers such that the area to be sealedis completely filled with hot-melt adhesive.Thanks to its fast and easy installation,the two-in-one heat shrink tubingis also well-suited for series productionpurposes.AdvantagesEasy processingSurface can be printed via hotseal, offset and inkjet processesFast shrinkage on to part requiringprotectionResistant to temperatures up to125°CLow thermal stress of the part to becovered during processingNo detachment under operatingtemperaturesWatertightGood adhesion to different typesof insulation materials, e.g. PVC,VPE, PP-EPDMGood resistance to aggressivemedia and fuelsFlammability complies with FMVSS302 (combustion rate max. 101.6mm/min)The jacket material of the blackversion is self-extinguishingProcessingIn general, DERAY ® -SPLICEMELT canbe used with every type of shrink appliance.We recommend using one of thefollowing from our product line:DERAY ® -SpliceMan IRDERAY ® -DockMan JuniorEndspliceDERAY ® -FSTWe would be pleased to advise youon the selection of the best shrink appliancefor your specific purpose at anytime. Descriptions of the individualshrink appliances and of the work theyperform are included in our equipmentdocumentation that we would be pleasedto supply you with on request.The operating instructions include informationon safety matters relevant to theoperation of our shrink appliances. It isalso possible to customise shrink tunnelsor equipment to suit your specific needsand wishes.28 © ShawCor Ltd. All specifications are subject to modification. Consult DSG-Canusa for the latest specification.
AutomotiveDERAY®-SPLICEMELT blackTechnical Data Current Values Test MethodsMaterial Jacket Material Polyolefin, modified, free oflead and cadmiumAdhesivePolyamid-basisSurfacesmoothSpecific gravity 1,25 g/cm 3 max. ASTM-D 792, A-IShrink ratio to 4:1Longitudinal shrinkage -10% max. ASTM-D 2671Mechanical properties Tensile strength 17 MPa IEC 60684-2Elongation 500 % IEC 60684-2Thermal properties Thermal ageing (168 h at +160°C) IEC 811-1-2Tensile strength12 MPaElongation 320 %Cold bend test does not break at -40°C ASTM-D 2671 Meth. CCombustion behaviour Jacket selfextinguishing FMVSS 302Shrink temperature+150°C to +200°CStorage temperature +50°C max.Continuous operatingtemperature-40°C to +125°C IEC 216Chemical properties Compatibility with copper non-corrosive ASTM-D 2671 Meth. BResistance against chemicals goodWater absorption 0,50% VDE 0473Electrical properties Dielectric strength 18 kV/mm VDE 0303 Part 2Specific volume resistance 10 14 Ω x cm VDE 0303 Part 329
Page 5: Company1998 Canusa-EMI acquires Ger
Page 8 and 9: Automotive IntroductionDSG-Canusa s
Page 11: AutomotiveAutomotivePipes & HosesDS
Page 15 and 16: AutomotiveDERAY®-IAKT NSTechnical
Page 17 and 18: AutomotiveDERAY®-HBKTTechnical Dat
Page 19 and 20: AutomotiveDERAY®-HB NSDimensionsEx
Page 21 and 22: AutomotiveDERAY®-INSTechnical Data
Page 23 and 24: AutomotiveDERAY®-DKITechnical Data
Page 25 and 26: AutomotiveDERAY®-KWS/KWS-RTechnica
Page 27: AutomotiveSplicesEnd splicesDERAY
Page 31 and 32: AutomotiveSmall Cable BundlesDERAY
Page 33 and 34: AutomotiveDERAY®-IPM (PRESSMELT)Te
Page 35 and 36: AutomotiveDERAY®-IAKT clear (PRESS
Page 37 and 38: AutomotiveDERAY®-IHKT clear (PRESS
Page 39 and 40: AutomotiveMedium-Sized Cable Bundle
Page 41 and 42: AutomotiveDERAY®-Adhesive Strip 85
Page 43 and 44: AutomotiveDERAY®-IAKT clear (DUOME
Page 45 and 46: AutomotiveDERAY®-IHKT black (DUOME
Page 47 and 48: AutomotiveLarge Cable BundlesDERAY
Page 49 and 50: AutomotiveDERAY®-Coldmelt I 85°C-
Page 51 and 52: AutomotiveDERAY®-Coldmelt I HT 125
Page 53 and 54: AutomotiveHalf-Shell Sealing System
Page 55 and 56: AutomotiveDERAY®-COLDMELT IITechni
Page 57 and 58: AutomotiveInsulating and Protecting
Page 59 and 60: AutomotiveDERAY®-IOK Insulating Ca
Page 61 and 62: AutomotiveDERAY®-HIOK Insulating C
Page 63 and 64: AutomotiveDERAY®-BIOK 85°C System
Page 65 and 66: AutomotiveAutomatic sealing DERAY®
Page 67 and 68: AutomotiveHigh TemperatureApplicati
Page 69 and 70: AutomotiveDERAY®-VA 25Technical Da
Page 71 and 72: AutomotiveDERAY®-VT 220Technical D
Page 73 and 74: AutomotiveDERAY®-KY 175Technical D
Page 75 and 76: AutomotiveAutomotiveBraided Sleeves
Page 77 and 78: AutomotiveCANUFIX ® Braided Sleeve
Page 79 and 80:
AutomotiveDesign: Seat belt locks a
show all

derayÂ®-iakt ns - DSG-Canusa

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?