E-625 Piezo Servo-Controller & Driver - PZT & Piezo Actuators: Sub ...

Piezo • Nano • PositioningLinear Actuators & MotorsNanopositioning / PiezoelectricsPiezo Flexure Stages /High-Speed Scanning SystemsLinearVertical & Tip/Tilt2- and 3-Axis6-AxisTwo single-channel piezocontrollers: E-625 and themore powerful E-665(background)Fast Steering Mirrors /Active OpticsPiezo Drivers /Servo ControllersSingle-ChannelMulti-ChannelTechnical DataModelE-625.SR / E-625.CRFunctionPiezo Amplifier / Servo-ControllerAxes 1SensorServo characteristics P-I (analog), notch filterSensor typeSGS (.S) / capacitive (.C)AmplifierControl input voltage range -2 to 12 VMin. output voltage-30 to 130 VPeak current, < 5 ms 120 mAAverage current60 mACurrent limitationShort-circuit-proofNoise, 0 to 100 kHz0.8 mVrmsVoltage gain 10 ±0.1Input impedance100 kΩInterfaces and operationInterface / communication* USB, RS-232 (9-pin Sub-D connector,9.6–115.2 kBaud), 24-bit A/D and 20-bit D/APiezo connectorLEMO ERA.00.250.CTL (.SR) / Sub-D Special (.CR)Sensor connectionLEMO EPL.0S.304.HLN (.SR) / Sub-D Special (.CR)Control input sockets SMBSensor monitor socket SMBController networkup to 12 channels, parallelCommand set*PI General Command Set (GCS)User software*PIMikroMoveSoftware drivers*LabVIEW drivers, DLL'sSupported functionality* Wave table, 256 data points, external trigger,16 macrosMiscellaneousOperating temperature range +5 to +50 °COverheat protection Deactivation at 75°CDimensions205 x 105 x 60 mmMass1.05 kgOperating voltage12 to 30 V DC, stabilized (power supply included)Current consumption 2 A* E-625.S0 and E-625.C0 without interfaceModularAccessoriesPiezoelectrics in PositioningNanometrologyMicropositioningIndex