10.07.2015 Views

Download PDF instructions for The Micro-light Petrol Tiller/Cultivator

Download PDF instructions for The Micro-light Petrol Tiller/Cultivator

Download PDF instructions for The Micro-light Petrol Tiller/Cultivator

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

MAINTENANCE• Keep machine, attachments and accessories in safeworking condition.• Look <strong>for</strong> signs of damage to the tines. Replace anyrotavator tines and parts that are worn out, bent,cracked, chipped or damaged in any way.• Check that the debris shield is securely installed andin good condition.• Check shear pins, engine mounting bolts and otherbolts at frequent intervals <strong>for</strong> proper tightness to besure the rotavator is in safe working condition.• Check the air filter. A dirty air filter will restrict airflow to the carburetor, reducing engine and tillingper<strong>for</strong>mance.• Check the throttle operation. <strong>The</strong> throttle mustoperate smoothly <strong>for</strong> good throttle control.• Check the fuel level. Starting with a full tank willhelp to eliminate or reduce operating interruptions<strong>for</strong> refuelling.• Never store the machine with fuel in the fuel tankinside a building where ignition sources are present,such as hot water and space heaters, clothes dryers,and alike. Allow the engine to cool down be<strong>for</strong>estoring in any enclosure.• Always refer to these <strong>instructions</strong> <strong>for</strong> importantdetails if the rotavator is to be stored <strong>for</strong> anextended period.CUSTOMER RESPONSIBILITIES• Read and observe the safety rules.• Follow a regular schedule in maintaining, caring <strong>for</strong>and using your rotavator.• Follow <strong>instructions</strong> under “Maintenance andStorage” section of these <strong>instructions</strong>.• Make sure all repairs to the machine aredone correctly.• If a part is replaced, make sure it is the correct partand the bolts or nuts are tightened.5

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!