FOLGER ADAM 712 Install Instructions - Hes

Installation Directions3Diagram 2: Faceplate AttachmentTo install the 700 series electric strike body to thefaceplate, install two #8-32 Body Mounting screwsas shown. Make sure bolts are tightened and secured.Keeper position can be adjusted by loosening the #8-32body mounting screws, and repositioning the strike bodyas needed. Retighten body mounting screws afteradjustment is madeDiagram 3: Determining Mortise OffsetC L MortiseDoor Prep8”[203.20]4”[101.60]BC LStrikeMORTISE LOCK BCORBIN/RUSSWINARROW, FALCON0"BEST 34H-37H 1/4"SARGENT (8200)YALE (8800)3/16"SCHLAGE 3 /4"YALE (8700) 7/8"BEST 45H & 47H* 1/8"*Best 45H & 47H are recommended foruse with the 742-75 only.

Cutout Templates1-1/4”[31.75]5/8”[15.88]712 Template & Dimensions(RHRB APPLICATION SHOWN)Method of install may vary per door & frame manufacturer1-5/8”[41.3]Inches [mm]44-7/8"[123.83]3-3/8"[85.72]4-1/8"[104.78]3-3/8”[85.72]1/2”[13]1-1/4”[31.75]4-1/8”[104.78]4-7/8”[123.83]6”[152.4]1/8”[3.5]1-1/2”[38.10]1-1/2"[38.10]712-75 Template & Dimensions(RHRB APPLICATION SHOWN)Method of install may vary per door & frame manufacturer1-1/4”[31.75]5/8”[15.88]1-7/8”[47.6]4-7/8"[123.83]3-3/8"[85.72]4-1/8"[104.78]3-3/8”[85.7]4-1/8”[104.8]4-7/8”[123.8]6”[152.4]1/2”[13]1-1/4”[31.8]1/8”[3.5]1-1/2”[38]1-1/2"[38.10]