ENERGY STAR Power and Performance Data Sheet - Nec

ENERGY STAR ® Power and Performance Data SheetExpress5800/GT110d-S [Core i3-2120 model]System CharacteristicsForm FactorAvailable Processor SocketsAvailable DIMM Slots / Max Memory CapacityECC and/or Fully Buffered DIMMsAvailable Expansion SlotsMinimum and Maximum # of Hard DrivesRedundant Power Supply Capable?Power Supply Make and ModelPower Supply Output Rating* (watts)Minimum and Maximum # of Power SuppliesInput Power Range (AC or DC)Power Supply Efficiency at Specified Loadings*Power Supply Power Factor at Specified Loadings*Operating Systems SupportedInstalled Operating System for TestingPedestal14/32GBYes2 PCI-E 2.00 to 3NoLeadYear TG10-0250-01250W1100-240VAC85.0%@20%, 88.4%@50%, 85.9%@100%0.970@20%, 0.990@50%, 0.999@100%Microsoft Windows Server 2003 StandardMicrosoft Windows Server 2003 R2 StandardMicrosoft Windows Server 2008 Standard/EnterpriseMicrosoft Windows Server 2008 R2 Foundation/Standard/EnterpriseRed Hat Enterprise Linux 5.6Red Hat Enterprise Linux 6.1Microsoft Windows Server 2008 R2 Standard* Note: Power supply information is for a single power supply onlySystem ConfigurationsPower DataMinimum Typical MaximumConfiguration ID N8100-1774Y N8100-1774Y N8100-1774YProcessor Information 1, Intel Core i3-2120 1, Intel Core i3-2120 1, Intel Core i3-2120Memory Information 1, 1GB 2, 8GB 4, 8GBInternal Storage 1, HDD 2, HDD 3, HDDI/O Devices 2, onboard 1Gb ports 2, onboard 1Gb ports2, onboard 1Gb ports+ 1, 1Gb(4ch) NICPower Supply Number and Redundancy Configuration 1, Non Redundancy 1, Non Redundancy 1, Non RedundancyManagement Controller or Service Processor Installed? Yes Yes YesOther Hardware Features / AccessoriesIdle Category (1S and 2S only)Minimum Typical MaximumENERGY STAR Idle Power Allowance (1S and 2S only) 65.0 97.0 145.0Measured Idle Power (watts) 30.96 51.72 69.00Power at Full Load* (watts) 49.14 71.37 90.47Benchmark / Method Used for Full Load TestTest Voltage and Frequency for Idle and Full Load TestRange of Total Estimated Energy Usage ** (kWh/year) 0,542 to 0,861 0,906 to 1,250 1,209 to 1,585Link to Detailed Power Calculator (if available)Power and Performance for Benchmark #1Benchmark #1* Note: Full load power represents the sustained, average power at 100% load of the given workload, and does not necessarily represent the absolute peak power or thehighest average, sustained power possible for other workloads.** Note: Estimated kWh/year gives the absolute range of energy use a user could expect from continuous operation (24x7x365) and ranges from 100% Idle usage to 100%full load operation. The calculation also includes typical data center overhead at a ratio of 1 watt of overhead to every 1 watt of IT load (corresponding to a PUE of 2.0).Closer approximations may be found by using established power calculators and specific information about the intended operating environment (e.g., average time at Idle,data center PUE, etc.).Benchmark Used and Type of WorkloadMinimum Typical MaximumSiSoftware Sandra Engineer 2010 / .NET Multi-MediaAvg. Power Measured During Benchmark Run 49.14 71.37 90.47Benchmark Performance Score 12.80 12.72 12.73Power Performance Ratio (perf score/avg. power) 0.26048 0.17823 0.14071Link to Full Benchmark Report (Where Available)Category B: Managed Single Installed Processor (1P) ServersSiSoftware Sandra Engineer 2010 / .NET Multi-Media230V / 60HzPower and Performance for Benchmark #2 (optional)Benchmark #2Benchmark Used and Type of WorkloadAvg. Power Measured During Benchmark RunBenchmark Performance ScorePower Performance Ratio (perf score/avg. power)Link to Full Benchmark Report (Where Available)Minimum Typical Maximum

ENERGY STAR Power and Performance Data SheetExpress5800/GT110d-S [Core i3-2120 model]Page 2 of 3Power Saving FeaturesProcessor Dynamic Voltage and Frequency ScalingProcessor or Core Reduced Power StatesPower CappingVariable Speed Fan Control Based on Power or Thermal ReadingsLow Power Memory StatesLow Power I/O StatesLiquid Cooling CapabilityOther1:Other2:Other3:Other4:Enabled onShipmentYesYesNoYesNoNoYesEnd-User EnablingRequiredNoNoYesNoNoNoNoPower and Temperature Measurement and ReportingInput Power Available & Accuracy?Input Air Temp Available & Accuracy?Processor Utilization Available?Other Data Measurements Available & Accuracy?Compatible Protocols for Data CollectionAveraging method and time periodYes, +/-5%Yes, +/- 2 degree CYesIPMINon Averaging, 1 sec. interval samplingThermal Information *NotesMinimum Typical MaximumTotal Power Dissipation (watts) 49.14 71.37 90.47Delta Temperature at Exhaust at Peak Temp. (˚C) 34.5 37.7 41.3Airflow at Maximum Fan Speed (CFM) at Peak Temp. 11.0 11.5 14.2Airflow at Nominal Fan Speed (CFM) at Nominal Temp. 8.7 8.8 9.4* References: ASHRAE Extended Environmental Envelope Final August 1, 2008Thermal Guidelines for Data Processing Environments, ASHRAE, 2004, ISBN 1-931862-43-5Peak temperature is defined as 35 ˚C, Nominal Temperature is defined as 18 - 27 ˚C1. SPECpower_ssj2008 is a registered trademark of the Standard Performance Evaluation Corporation (SPEC). Benchmark results stated above reflect results published on XX/XX/XX.For the latest SPECpower_ssj2008 benchmark results, visit http://www.spec.org/power_ssj2008.ENERGY STAR Qualified ConfigurationsInclude specific information on ENERGY STAR Qualified SKUs or configurations

ENERGY STAR Power and Performance Data SheetExpress5800/GT110d-S [Core i3-2120 model]Page 3 of 3ENERGY STAR Qualified Configurations (Continued)Include specific information on ENERGY STAR Qualified SKUs or configurations