GM-7000 Series Multi-function Gas Control Valve ... - ShanControls

SpecificationsProduct GM-7000 Series Multi-function Gas Control ValveMedia 1st (Manufactured Gas), 2nd (Natural Gas), and 3rd (LP Gas) Family GasesMaximum Operating Pressure North America: 1/2 psiEurope: 100 mbar; Class A (EN 161)50 mbar; Class B (EN 161)Maximum Differential Pressure 20 mbar (8 in. W.C.)Reverse Pressure Ratings 150 mbar (60 in. W.C.) Minimum; Class A (EN 161)50 mbar (20 in. W.C.) Minimum; Class B (EN 161)Regulator Classification Direct-acting Regulator: Class B (EN 88)Lever-acting Regulator: Class C (EN 88)Direct-acting or Lever-acting Natural Gas:5 to 15 mbar (2 to 6 in. W.C.)Regulator Pressure Range LP Gas:22.5 to 30 mbar (9 to 12 in. W.C.)Permissible Ambient Temperature 0 to 70°C (32 to 158°F)Body Connections 3/8 or 1/2 in. NPT or Rp with Flange Connection Holes (M4 x 0.7 mm Pitch x 6 mm Deep)Valve Torsion Group Group 2 (EN 88 and EN 161)Pressure Taps 9.0 mm (0.35 in.) Outlet Tap Spigot; Optional 1/8 in. NPT or Rp Inlet TapPilot Connection Optional 6 mm, 4 mm, 1/4 in., or blank plugDimensions (H x W x D) See Figures 5 through 7.Materials Body: Die-cast AluminumDiaphragms and Seals: Nitrile RubberDirt Strainer 0.5 mm (0.02 in.) meshOperating Time Rating 100% ContinuousValve Timings Closing Time: < 1 SecondOpening Time: < 1 SecondDead Time:< 1 SecondPower Ratings 16 VA per Coil; Class A (EN 161)9.5 VA per Coil; Class B (EN 161)Electrical Connections 3-pin Solenoid Coil: 2 x 6.35 mm (1/4 in.) Terminals + 6.35 mm (1/4 in.)Earth Ground Terminal2-pin Solenoid Coil: 2 x 6.35 mm (1/4 in.) Terminals + Earth GroundScrew ConnectionCoil Insulation Class Class FAgency Listings IAS (AGA/CGA) Certificate Number C0197003EC Type Examination Certificate Number C87AP57Australian Gas Association Certificate Number 4518Specification Standards EN 88, EN 126, EN 161, and EN 12067-1Standards Complying with the EMC DirectiveStandards Complying with the Low Voltage DirectiveCanadian Standard CAN 1-6.3 and 1-6.5ANSI Standards, Z21.21 and Z21.78Australian Standard 209, Class 2 to AGA 214The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond thesespecifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting frommisapplication or misuse of its products.Refer to the GM-7000 Series Technical Bulletin (LIT-121910) for necessary information on the installation, use, and servicing of this product.Controls Groupwww.johnsoncontrols.com507 E. Michigan Street FAN 435.0P.O. Box 423Heating Line Product GuideMilwaukee, WI 53201Printed in U.S.A.12 GM-7000 Series Multi-function Gas Control Valve Product Bulletin