00 ItMa 2011 (exclusive Feature) - Textile Magazine

itMA 2011 [exclusive feature]
(denim), Ram weld technology for
denim and dryers for warp, fabrics
and non-woven.
The warping machines are suitable
for spun yarn or filament yarn
and are available in three standard
sizes suitable for beams flange diameter
of up to 1000, 1250, 1400
and for carpets of 1600 mm. The
warping creels are suitable for spun
yarn or filament yarn available in
many sizes and types depending on
the yarn features.
Sizing machines are tailor-made
to the warp features, using standard
50 | ThE TEXTILE MAGAZINE OCTOBER 2011
components in order to have maximum
reliability. The machines are
electronic type, i.e., each part of the
sizing machine is driven by a variable
speed A/C motor inverter controlled,
and all the motors are synchronized
by an automatic control
system.
In the indigo warp dyeing segment
for the denim industry, Ramallumin
offers many standard options for indigo
dyeing only and/or many other
dyestuffs available on the industry
market such as sulphur dyestuffs,
pigment dyestuffs, etc.
Ram weld technology for denim
allows connection of a new lot
with the lot in progress without any
change in working speed of the dye
section. This involves no loss of
time for stopping production during
change of warp beams and also reduced
warp waste.
Finally denim and dryers for warp,
fabrics and non-woven, Ramallumin
offers many standard options,
including cylinder dryers for warp,
fabrics and non-woven, and air dryers
and IR dryers for warp.
w