CHARGING SYSTEM PACKAGESCharging system packages make it easier than ever to ensure that your alternator and regulator will match yourengine with the least amount of installation headaches.Note that any alternator/regulator packages featuring alternator output ratings in excess of 100 amps will requireeither dual vee drive pulleys or multi-groove pulleys to ensure optimal output and limited belt wear. See Page13 for information about new AltMount ® Serpentine Pulley Kits.AT-Series AlTERNATOR/regulatorPACKAGESNew AT-Series alternators, combined with theproven charge control of the MC-614 voltageregulator, provide the ideal charging solution forbigger house batteries and newer high-acceptancebattery technologies. Packages include 165-amp or200-amp AT-Series alternator, Max Charge MC-614voltage regulator, alternator temperature sensor,battery temperature sensor. VUP package can beused in 2” single foot applications. YP packageincludes a conversion bracket for use in 3.15”IDsaddle-style mounts. AT Packages must be installedin dual belt, or serpentine belt systems.6-Series AlTERNATOR/regulatorPACKAGES<strong>Balmar</strong>’s 6-Series alternators and multi-stagevoltage regulators deliver faster, safer chargingfor batteries ranging from standard floodedto AGM technologies. Choose ARS-5 or MaxCharge regulators to meet your preferred level ofperformance.YP models fit engines using a 3.15” I.D. saddlemount. VUP models fit most engines using 1” or 2”single foot mounts. Kits include alternator, voltageregulator, battery and alternator temperaturesensors and wiring harness. YP kits includemounting hardware.Includes ARS-5RegulatorIncludes MC-614RegulatorIncludes MC-624RegulatorMountingStyleOutputAmps/VoltsMin.Belt Width60-YP-70-SR-KIT 60-YP-MC-70-SR-KIT N/A 3.15” Saddle 70A, 12V Single 3/8” 19 lb.60-YP-100-SR-KIT 60-YP-MC-100-SR-KIT N/A 3.15” Saddle 100A, 12V Single 1/2” 19 lb.60-YP-120-SR-KIT 60-YP-MC-120-SR-KIT N/A 3.15” Saddle 120A, 12V Dual 1/2” 19 lb.60-YP-150-SR-KIT 60-YP-MC-150-SR-KIT N/A 3.15” Saddle 150A, 12V Dual 1/2” 19 lb.N/A N/A 60-YP-24-70-SR-KIT 3.15” Saddle 70A, 24V Dual 1/2” 19 lb.621-VUP-70-SR-KIT 621-VUP-MC-70-SR-KIT N/A 1” OR 2” Spindle 70A, 12V Single 3/8” 19 lb.621-VUP-100-SR-KIT 621-VUP-MC-100-SR-KIT N/A 1” OR 2” Spindle 100A, 12V Single 1/2” 19 lb.621-VUP-120-SR-KIT 621-VUP-MC-120-SR-KIT N/A 1” OR 2” Spindle 120A, 12V Dual 1/2” 19 lb.621-VUP-150-SR-KIT 621-VUP-MC-150-SR-KIT N/A 1” OR 2” Spindle 150A, 12V Dual 1/2” 19 lb.N/A N/A 621-VUP-24-70-SR-KIT 1” OR 2” Spindle 70A, 24V Dual 1/2” 19 lb.ShipWeightN/A AT-YP-MC-165-KIT N/A 3.15” Saddle 165A, 12V Dual 1/2” 25 lbN/A AT-YP-MC-200-KIT N/A 3.15” Saddle 200A, 12V Dual 1/2” 29 lbN/A AT-VUP-MC-165-KIT N/A 2” Spindle 165A, 12V Dual 1/2” 25 lbN/A AT-VUP-MC-200-KIT N/A 2” Spindle 200A, 12V Dual 1/2” 29 lb– 12 –© 2013 Ballard Commercial Industries, Inc.
NEW!SERPENTINE PULLEY KITSYanmar SERPENTINE PULLEY KITSModel Engine Model(s) Ship Weight48-YSP-6LY-A 6LY, 6LYA-STP, 6LY2-STP48-YSP-6LP-A 6LPA-STP2, STZP2, STZP348-YSP-4JH-A4JH548-YSP-4JH-B4JH4HTE, TE, DTE48-YSP-4JH-C4JH4-E48-YSP-4JH-D4JH3, TE, HTE48-YSP-4JH-E 4JH2, TE, HTE, DTE, UTE48-YSP-4JH-F4JHE, TE, HTE, DTE48-YSP-4LH-A4LH-A48-YSP-3JH-A3JH548-YSP-3JH-B3JH4-E48-YSP-3JH-C3JH2-TE48-YSP-3JH-D3JH2-E48-YSP-3GM-A3GM3048-YSP-3GM-B3GM30-F48-YSP-3HM-A3HM3548-YSP-3HM-B3HM35-F48-YSP-3YM-A3YM2048-YSP-3YM-B3YM3048-YSP-2YM-A2YM15UNIVERSAL SERPENTINE PULLEY KITS48-USP-M-AM-25XP48-USP-M-B M-35Visit us online at WWW.BALMAR.NET<strong>Balmar</strong> is proud to announce the addition ofAltMount TM to the Ballard Commercial Industriesfamily of companies.Since its introduction in 2008, AltMount has been aleading designer and manufacturer of aftermarketserpentine pulley kits for marine diesel engines.Our acquisition of AltMount allows us to expandthe range of available pulleys based on AltMount’sproven, patented designs.In addition to pulley kits, which allow the user toincrease the output capacity of the original positionalternator, the AltMount second alternator kitsprovide the ability to add a high-output secondalternator for increased charging output. These kitsare an ideal upgrade for serious cruisers and othersthat depend on the propulsion engine for substantialbattery charging needs.PERKINS SERPENTINE PULLEY KITSModel Engine Model(s) Ship Weight48-PSP-410-A 410748-PSP-410-B 410848-PSP-PR-APRIMAVOLVO SERPENTINE PULLEY KITS48-VSP-TD-ATDM-2248-VSP-D2-AD2-55A,B,C,D,E,F48-VSP-PR-APRIMA48-VSP-MD-AMD203048-VSP-MD-BMD2040WESTERBEKE SERPENTINE PULLEY KITS48-WSP-30-B 30-B48-WSP-W40W4048-WSP-42B42B48-WSP-W46W4648-WSP-W44-AW44A48-WSP-W44-BW44B48-WSP-W71W7148-WSP-W82W82Second AlTERNATOR BRACKET Kits48-YDA-4JH-AYANMAR 4JH348-YDA-4JH-B YANMAR 4JH4-HTE, TE48-YDA-4JH-CYANMAR 4JH4-E48-YDA-6LY-A YANMAR 6LY, 6LY-2New pulley, tensioner and bracket kits are currently under development. Visit us at www.balmar.net, or contactus for updated information if your engine is not currently supported in these listings.– 13 –