Balmar Product Guide

ALTERNATORSNEW!AT-SERIESADVANCED TECHNOLOGY ALTERNATORSWelcome to the newest generation of high output alternatortechnology!Balmar AT-Series alternators bring together the latestinnovations in alternator design to deliver incredible chargingpower in a compact, marine-friendly package.AT-Series alternators start out with a unique hairpin statordesign which uses densely-wound square copper wire togenerate exceptional amperage output in the smallest areapossible. Hairpin stators feature 96 slots, compared to a 36-slotstators, allowing the hairpin wound stator to develop superiorelectromagnetic energy and produce electrical current moreefficiently than other traditional alternator designs.New AT-Series alternators feature custom-designed, advancedpowdercoat aluminum frames which are engineered to provide optimalairflow and unsurpassed cooling capacity. In addition, AT-Series alternatorsare equipped with a dozen 40-amp-capacity, externally mounted non-avalanche diodes, cool-runningdual internal fans, and massive heat sinking designed to ensure ample cooling under high load demands.Scaled to fit in most original-position installations, 128mm 165 ampAT-Series alternators are available in 1” and 2” single foot mountingstyles. Larger output, 200-amp alternators are housed in a 139mmdiameter frame and feature a single 2” mounting foot. Mountingbrackets are available to convert both 165 and 200 amp models foruse with 3.15”ID (Hitachi) or 4” (J180) style mounts.AT-Series alternators are designed to be used with MaxCharge MC-614 voltage regulators, and should only beused in dual vee belt or multi-groove serpentine beltapplications. New Balmar serpentine pulley kits providethe ability to upgrade many engine models to support AT-Series alternators. See Page 13 for more information.S-Stator (Rear), Hairpin Stator (Front)– 6 –Model #MountingStyleOutputAmps/VoltsFrameDia.ShWtAT-SF-165-12-IG Sgl. Ft. 1” or 2” 165A, 12V 129mm 18.5 lb.AT-SF-200-12-IG Sgl. Ft. 2” 230A, 12V 139mm 22.5 lb.Saddle Mount BracketsAT-165-3-MT Converts 1” AT foot to 3.15”ID Saddle Mount 1.5 lbAT-165-4-MT Converts 1” AT foot to 4”ID Saddle Mount 1.5 lbAT-200-3-MT Converts 2” AT foot to 3.15”ID Saddle Mount 1.5 lbAT-200-4-MT Converts 2” AT foot to 4”ID Saddle Mount 1.5 lb© 2013 Ballard Commercial Industries, Inc.