Balmar Product Guide

MULTI-STAGE VOLTAGE REGULATORSMax Charge MC-612-DUAL RegulatorAs more boaters opt to install a second alternator on theirpropulsion engine, Balmar introduces the MC-612-DUAL,the first regulator that’s made specifically to control twoalternators on a single engine.The MC-612-DUAL-H features twin 54” wiring harnesses andthe ability to sense temperature at two alternators(regulator is programmable to toggle between dualbattery or dual alternator temperature sensing).Like other Max Charge models, the MC-612-DUALfeatures seven selectable battery programs, alongwith a wealth of advanced programmability, so it’stailor-made for just about any boating application.ARS-5 Advanced RegulatorThe ideal choice for the budget-minded boater, theARS-5 regulator is designed for use with a single12-volt alternator, yet it provides five selectablebattery programs, a belt load manager, and a range ofadvanced programming functions.Like all the Max Charge regulators, the ARS-5 regulator features an easy-to-read, 3-digitdisplay, and convenient magnetic reed switchfor programming adjustments. Temperaturesensing circuits for two batteries andalternator. For use with a single P-type 12-voltalternator. 1 year limited warranty.• Selectable preset programs for Gel, AGM, Deep-Cycle Flooded, SpiralWound (Optima) Batteries• Universal default program that’s safe for most marine batterytechnologies• 9A maximum field current output. For use in single alternatorapplications only.• Alternator and battery temperature sensing with optional sensorcables (see Page 18) provides added charging efficiency andgreater system safety.• A bright LED alphamumeric display and easy to navigateprogramming mode increase user friendliness• Scrolling program modes are controlled by an easy-to-use reedswitch and magnetic programming tool, included with theregulator.• Belt Load Manager allows user to reduce maximum regulator fieldoutput in five percent increments to ensure that belts are protectedfrom undue wear.• ARS-5-H includes a 54” long wiring harness for greater ease ofinstallation.• Short or long display modes allow the user the ability to see theminimum or maximum operational data while the regulator isactive.ModelVoltsMulti-Stage Regulator Features & SpecificationsBat.Temp.SenseAlt. Temp.SenseWiringHarnessBat. EQ.PresetBat.Progs.DualAlts.Belt WearControlAdv.Prog.ModeDimensionsMC-612-DUAL 12 YES (2) YES (2) NO YES 7 YES YES YES 4.8"x3.2"x1.5" 1 lbMC-612-DUAL-H 12 YES (2) YES (2) YES (2) YES 7 YES YES YES 4.8"x3.2"x1.5" 2 lbARS-5 12 YES (1) YES NO NO 5 NO YES YES 4.1”x3.2”x1.5” 1 lbARS-5-H 12 YES (1) YES YES NO 5 NO YES YES 4.1”x3.2”x1.5” 1.5 lbNOTES: Optional MC-TS-A and MC-TS-B temperature sensors are required to enable advanced regulator temperature sensing functions. DO NOT attempt to usethe ARS-5 to control dual alternators. Balmar voltage regulators are designed for use with P-type alternators only. Install regulators in well ventilated location withambient temperature