GENESIS SPECTRUM USER MANUAL

Chapter 5Spectrum Basics5.8 Recalling Stored SpectraSpectra saved in the *.spc file format can be recalled into the Genesis software for spectralprocessing and/ or review.Spectrum files that have been saved can be opened by using the open button on the toolbar,or by selecting “Open” in the “File” pull down menu. The desired file can be located andselected from the “Open” dialog box. Click on “Open” to open the selected file. Multiplespectrum windows can also be opened by selecting “New” in the “File” menu.Spectra from other Genesis Tabs can be brought in by using the “Import Spc From…” itemin the “File” menu. This displays a popup menu offering a selection for the Tab to importfrom:Only the submenus for packages installed are activated. “Restore” will restore the originalspectrum before importing back into the current view.5.8.1 File or Current ParametersWhen the file has been selected, a window entitled “File or Current Parameters” will bedisplayed. In this window, the user has the option to open the file with the current elementlist, regions of interest, background and analysis conditions, or with the settings that weresaved with the file. A combination of both saved and current settings can be used. Selectthe desired parameters and then click “Ok”. Use the “all current” or “all file” for easyselection if not using a combination of both.30 GENESIS Spectrum - User’s Manual