McQuay MDS Multi System

Design & installation Guide For McQuay MDS Multi SystemTimer settingPress Timer to enter timer setting (When the unit is ON, it can only be set to OFF;When the unit isOFF , it can only be set to ON) and last timer will be shown on the LCD.If there is no press on any key within 5 seconds, it will exit and cancel the timer setting atthe same time. During this 5 seconds, press to increase the hour whilepress to increase the minutes, please press Timer within 5 secondsto confirm the setting.When it is timer setting, the system will show the real time and thesetting time on the LCD. When the setting time is reaching, the unit will be Power on or off,and the timer setting function is cancel. When you need the timer setting function, youneed to reset.Keyboard locked and unlocked settingPress Sleep and last for 5 seconds, the keyboard will be alter between locked andunlocked. When it is locked, a icon will be shown on the LCD. During the locked stage, onlythe ON/OFF keyboard is valid.ON/OFF settingPress ON/OFF keyboard, the unit will be alter between ON and OFF, and a relativeicon will be shown on the LCD.ResetThis keyboard is used to restart the unit because of some uncertain factors.Remote controllerThe remote controller can be used with the wire controller and it has the samekeyboard as the wire controller, But the keyboard Fan , Sleep , Heater do nothave the second function.Central controlThe units can be central controlled by the computer or centralized controller. When it islocked, the keyboard on the wire controller is invalid and the key icon is twinkling. It can onlybe unlocked by the computer or by the centralized controller. When it is central control, thewire controller can communicate with the computer and the centralized controller.-30-