BCL Programmers Manual V2.00 (PDF) - Barix

Revision HistoryVersi Dateon1.04 10/04/081.05 03/06/0804/06/0811/06/0821/07/081.06 27/08/0828/08/0829/08/0803/09/0804/09/081.07 08/09/0818/09/081.08 14/10/0815/01/0923/01/0909/02/0911/03/0912/03/0920/03/0920/05/0915/06/09InitialsPKPKPKPKPKPKPKPKPKPKPKPKPKPKPKPKPKPKPKPKPKNotesReleasedAdded SNMP interface descriptionMore detailed description of linereadTCP close with timeout describedCorrected wrong “Quality” settingin Audio Format table in section3.10.3.5; RTP payload type 11Added “Audio tunneling”Added multicast informationCorrected UDP sender example insection “Sending UDP packets” touse RESOLVE instead of VALAdded information about the RTPdecoder information and theusage of the DELAY parameter inRTPAdded default values to the audioparametersAdded input MUX control into theaudio parametersCorrected wrong indexing in LINKexampleChapters reorganised, created aseparate chapter for audioMore details in audio status andaudio parametersNew audio status items addedAdded Syntax overviewUpdated indexAdded LINK example RTP receiverAdded peak levels in dBFS intoaudio statusAdded playback_active statusvariableRemoved deprecated audiomodes16-bit key eventsAdded “Predefined macros” to thepreprocessor sectionAUX1_out_ctl by default offRemoved mic2_ctlAUX1_ctl changed to 3-state: off,input, outputSEEK on the audio handle flushesthe encoding FIFOAdded IR sectionAdded non-blocking TCP writeBarionet trap format corrected