Modular LubeÂ® Lubrication Systems Divider Valves - Dean Industrial

More documents

Recommendations

Info

Modular Lube ® Lubrication SystemsPump to Point LubricatorsLeft Hand Rear Gearhead Drive LubricatorsNote: Number following dash in the part number indicates quantity of pumpsincluded.Model Reservoir Max. No. Ratio Service SheetCapacity of Pumps Number800059-1,2 4 pint / 1.9L 5 60:1 M2-19Dimensions—in. / mmShaftModelA B C D E Dia.800059-1,2 5¹⁄₂ / 140 10⁵⁄₈ / 270 3¹³⁄₁₆ / 97 6⁹⁄₁₆ / 167 10⁷⁄₈ / 276 ⁵⁄₈ / 16End Rotary Drive Tandem LubricatorsDrive Data: Type—End rotary all gear.Rotation— Either clockwise or counterclockwise.Power Source—Machine drive; also suitable for motor drive.Note: Pumps and slot covers must be purchased separately.Model Reservoir Max. No. Drive Ratio Service SheetCapacity of Pumps Location Number820400 7 1:1 M2-217835400100:18 pint / 3.8L847400300:16 RH842400 400:1M2-218820300 4 Pint / 1.9L820600 16 Pint / 7.6L 151:1 M2-217ModelDimensions—in. / mmShaftA B C D E Dia.820400 1²³⁄₃₂ / 448354008³⁄₄ / 222 16⁵⁄₁₆ / 414847400 2⁵⁄₈ / 67842400820300 5¹⁄₂ / 140 11 / 279820600 20 / 508 26³⁄₄ / 6791²³⁄₃₂ / 444¹⁄₄ / 108 5⁷⁄₁₆ / 138 ⁵⁄₈ / 1627
Modular Lube ® Lubrication SystemsPump to Point LubricatorsModel 250095 Tandem Lubricator Mounting KitIncludes two mounting rails and the hardware necessary to attach an 8 pintprimary lubricator. The rails provide for the addition of a secondary lubricator andan electric driving motor.Model 250093 Motor Mounting KitRecommended if an electric motor is used. The primary lubricator may also bedriven by other suitable inputs such as direct connection, chains, belts, or gearreducer. The primary lubricator contains the drive reduction, if any.May be used with 835400, 842400 and 847400 lubricators only. Not intended foruse with 820400 lubricators in the primary lubricator position.Model 250097 Secondary Lubricator Mounting KitUsed when a secondary lubricator is added to the primary lubricator assembly.The secondary lubricator incorporates a direct connecting cam shaft, (no drivereduction) which is coupled to the primary lubricator.The secondary lubricator may be of 4, 8 or 16 pint capacity. No more than onesecondary lubricator should be driven by the primary lubricator unit.Note: See service sheet M3-40 for additional information.28
Page 2 and 3: People, Capabilities and Systems to
Page 4: Modular Lube ® Lubrication Systems
Page 7 and 8: Modular Lube ® Lubrication Systems
Page 27: Modular Lube ® Lubrication Systems
Page 51: Lincoln Industrial’sglobal distri

Modular LubeÂ® Lubrication Systems Divider Valves - Dean Industrial

Create successful ePaper yourself

Delete template?

Save as template?