Modular Lube® Lubrication Systems Divider Valves - Dean Industrial

Modular Lube ® Lubrication SystemsSystem ControlsModel 84015 Timer—12-24V DCSolid-state microprocessor-based controller for automated lubrication systems onmobile equipment or where AC power is not available. Rugged construction withliquid and dust-tight enclosure. Includes manual push button for remote initiation ofa lube cycle.Off Time**(Cycle Time)Min.Max.2.5 Min. 80 Min. 75 Sec.* Less load.** Available selections are 2.5, 5, 10, 20, 40 or 80 minutes.Fixed On Time Power Switch(Pumping Time) Requirements Capacity10-30 VDC25 MA*5 AmpsRatingNEMA 12EnclosureAmbient Operating Temperature RangeDimensions-in. / mmMinimumMaximumHeight Width Depth5¹⁄₄ / 133 3¹⁄₈ / 79 3 / 76 0°F / -18°C 131°F / 55°CModel 85530 Lubrication System ControllerControls lubrication frequency, master divider valve cycle and monitors supply linepressure. The LCD displays operating status.Lube CycleTimer ModeCounter ModeOff TimeOff CountsMin. Max. Min. Max.1 . 9,900 1 99,000Minute Minutes Count Counts* Minimum duration of count signal is 33 milliseconds.Max.CountRate*30/Sec.@ 50%Duty CyclePumping TimeBefore AlarmMin. Max.1 99Minute MinutesPower Requirements (less load) Pump, Ambient EnclosureSolenoid, Temperature Dimensions-in. / mmVoltage Current or Alarm Range RatingHeight Width DepthCapacity120 VAC, 50/60 Hz 85 MA230 VAC, 50/60 HZ 45 MA360 VA 32° to 122°F NEMA 9¹⁄₂ 8¹⁵⁄₁₆ 4¹⁄₈-0° to +50° C 12 241 227 10524 VDC 250 MA 5 AmpsNotes: Model 85530 is CSA/NRTL approved.31