Modular Lube® Lubrication Systems Divider Valves - Dean Industrial

Modular Lube ® Lubrication SystemsDivider ValvesMM Divider ValvesMM Divider Valves are designed to meter oil or grease in automatic or manual systems installed on all types of industrialmachinery. Physically smaller than the UV series, MM divider valve assemblies are used in complete MM systems or assecondary assemblies with UV and XL divider valves.Segmented baseplate assembly contains all inlet and outlet connections. Alternate outlet ports are located on the face ofthe divider valve which may be used for installation of performance indicators.Specifications:Maximum Maximum Lube Lube Performance Material of SealLube Points/ Operating Press. Inlet Outlet Indicator Port* Construction ConstructionAssembly psig / bar16 2500 / 170 ¹⁄₈" NPTF(F) ¹⁄₈" NPTF(F) ¹⁵⁄₁₆" - 24 UNF Zinc plated steel Buna-N* Can also be used as an alternate outlet port.MM Baseplate and Tie Rod Specifications:Maximum Number Inlet End Tie Intermediate DimensionsNumber of of Divider Section Section Rod Section AOutlets Valves* (Qty. rq’d.) (Qty. rq’d.) (Qty. rq’d.) (Qty. rq’d.) in. mm6 3 236646 (3) 87907 (3) 4.47 1148 4 236647 (3) 87907 (4) 5.25 13310 5 87906 (1) 87908 (1) 236648 (3) 87907 (5) 6.03 15312 6 236649 (3) 87907 (6) 6.81 17314 7 236650 (3) 87907 (7) 7.59 19316 8 236651 (3) 87907 (8) 8.38 213* Use No. 68645 closure plug (¹⁄₈" NPT) to plug non-working outlets.MM Divider Valve Specifications:Single OutletCycle Indicator Model LubricantStandardOutput perDesignation Model Left Right Outletcu. in. cc5S 871051 — — .010 .16410S 871101 — — .020 .32815S 871151 871155 871153 .030 .492Twin OutletCycle Indicator ModelLubricantOutput perDesignation Basic Model Left Right Outletcu. in. cc5T 871052 — — .005 .08210T 871102 — — .010 .16415T 871152 871156 871154 .015 .246Model 871000 Bypass Block Optional by-pass block permits addition or deletion of lubrication points withoutdisturbing existing installations. Includes mounting screws and Buna-N Gasket plate.6