Rexroth MTA 200 Rexroth BTV 20.4A - Nuova Elva

2-2 Machine Operator Terminal BTV 20.4A Rexroth BTV 20.4A
Standard Configuration of the BTV 20.4
Additional BTV 20.4A Modules
Furthermore, the BTV 20.4 is equipped with an extensive applicationoriented
function keyboard with the following keys:
• Machine function keys
• Function and operation keys
• PLC function keys with intermediate stages
• Keypad
For further information regarding the functioning and assignment of the
individual keys as well as the front plate elements discussed above, see
the description of the front plate in chapter 4.
• Pentium SLOT CPU, min. 700 MHz, with integrated graphics
controller, 4 MB screen memory and Ethernet connection
• Either 128 or 256 MB RAM
• At least 3 GB hard disk
• 3.5" floppy disk drive
• 10.4" TFT color display
• 115 - 230 V AC power pack
In the model functioning as an MTA 200 control system, the BTV 20.4A is
equipped with the following additional modules:
• NC CPU Pentium Slot CPU with 400 MHz
• NCM NC module with one SERCOS interface
• NCZ module with one or two additional SERCOS interfaces
• PLC module with INTERBUS-S or Profibus master connection
• NIO module for parallel connection of fast I/Os
All currently existing configurations can be found in the configuration type
key (see page 2-35).
All the listed modules are described in detail in the following chapters.
DOK-MTA200-BTV20.4A***-PR01-EN-P