Installation & User Guide SHOWER PUMP - QS Supplies

ElectricalBefore starting work on the electrical installation, ensure that the power supplyis isolated. Cable selection and corresponding fuse size should be chosen inaccordance with the current involved and surrounding conditions.All electrical installation work should be carried out by a competent person1. The unit is fitted with 1.3 metres of supply cable. Should this cable be too short,a suitable length of three-core cable (minimum 0.75mm per core) should beobtained and connected to the terminal block in the electrical box as shown inFigure 8. Remove the electrical box cover by unscrewing the four retaining screws.2. Do not use long cable lengths, as this may cause substantial voltage drop,poor pump performance, and could also result in motor overload.MAIN WINDINGBLUETHERMOTRIPREDCAPACITORBROWNSTART WINDINGBLACKFLOW SWITCHREEDFLOW SWITCHREEDOPTIONAL ALTERNATIVESTART METHODe.g. Momentary Action SwitchBLUENBROWNGREEN\YELLOWLPOWER SUPPLYSingle Phase 230 VAC / 1PH / 50HzESchematic Wiring DiagramFigure 816