Imagecraft c compiler and development environment for the atmel avr

ICCV8 for AVR – C Compiler for Atmel AVRUsing the Hardware DongleICCV8 for AVR allows you to optionally use a hardware dongle instead of the defaultsoftware licensing scheme. With a dongle, you may install the compilers on multiplecomputers and run it on one machine at any given time.Using the USB Licensing DonglePlug in the USB dongle. It uses the standard Windows USB driver and no additionaldriver is needed.Run “ICCV8AVR License Manager” (Start->ImageCraft Development Tools->ICCV8AVR License Manager) If this is a new purchase, click "Enable Dongle Check." If you already have a software license, click "Transfer Software License toDongle."If you are unsure, try “Enable Dongle Check” and if there is no license on the USBdongle, you will receive an error message.When a machine is dongle licensed, and if the dongle is not present while runningthe compiler, the compiler uses "EXPIRED DEMO" as its license.If you have BOTH a software license and a licensing dongle (RARE), click "EnableDongle Check" to enable dongle check and "Disable Dongle Check" to disable thecheck and use the software license.Please restart the IDE after these operations.Upgrading a Dongle LicenseTo upgrade the dongle license, on a command prompt, typec:\iccv8avr\bin\ilinkavr --DONGLE:0and email the serial number to license@imagecraft.com. After we email you thedongle upgrade code, paste the code into the "Dongle Upgrade Code" edit box in theICCV8AVR License Manager and click "Enter Code."10