SEEDBED PREPARATION TOOLS - AGCO Iron

Flexible wings on folding models. Wings can flex both upand 10 degrees down allowing the Soil Conditioner to followground contours without loosing contact with the soil. No otherconditioning type tool can claim a 10 degree downward flex.Adjustable wing gangs allow up to 30 inches of adjustment. Theoutside gangs can be slid in from 6 – 30 inches on certain models toform a better match to the host implement.Exclusive “Chevron” Reel DesignSunflower’s exclusiveChevron reel designpulls 30% easier,eliminates vibrationand conditions soilmore uniformly. TheChevron designedrods help create thestructural strengthneeded to withstandthe toughest soilconditions.Smooth reel ends, withno protrusions to wrap oraccumulate trash, stayclean, eliminating costlydowntime.For superior “stay-clean” ability, the 7200 hasheavy-duty large 17" diameter conditioningreels with ten 7/8" Chevron rods. The widerspaces between rods insures less trashaccumulation, while still producing desirablefirming and soil conditioning effects byconstantly contacting the soil.Gang width and length of pull hitchare fully adjustable to allow the SoilConditioner to be tailored exactly tothe host machine. The hitch can belengthened or shortened to accommodateattachments and the tillage tool turningradius. Width on most models can beadjusted up to 30 inches to match cuttingwidth of host machine.Constant ContactExclusive “Chevron” Reel Design• Eliminates vibration, prolongingframe life.• Constant soil contact producesuniform leveling.• “Chevron” design pulls 30% easierthan spiral designs.• Sunflower Soil Science reveals firm,level soils promote consistent emergenceand vigorous early plant growth.• Conservation soil management canbe enhanced with the use of aSunflower Soil Conditioner.For additional information, visit ourwebsite at www.sunflowermfg.com.7200 Soil ConditionerMODEL CUTTING NO. OF NUMBER & TRANS. TRANS. EST.WIDTH SECTIONS SIZE OF REELS WIDTH HEIGHT WEIGHT7212-15* 15’ 1 3 – 60” 16’ N/A 2,7817212-17* 17’ 6” 1 1 – 60” & 2 – 75” 18’ 6” N/A 2,9277212-20* 20’ 1 1 – 60” & 2 – 90” 21’ N/A 3,0727212-22* 22’ 6” 1 1 – 60” & 2 – 105” 23’ 6” N/A 3,2247232-18** 18’ 3 5 – 45” 13’ 6” 8’ 10” 3,8907232-20** 20’ 6” 3 2 – 60” & 3 – 45” 13’ 6” 9’ 10” 4,1207232-23** 23’ 3 2 – 75” & 3 – 45” 13’ 6” 10’ 10” 4,2647232-25** 25’ 6” 3 2 – 90” & 3 – 45” 13’ 6” 11’ 10” 4,5207232-28** 28’ 3 1 – 45”, 2 – 60” & 2 – 90” 15’ 10” 11’ 10” 4,9307232-30** 30’ 6” 3 1 – 45”, 2 – 60” & 2 – 105” 15’ 10” 12’ 10” 5,0757232-32(NC)* 32’ 6” 3 1 – 45” & 6 – 60” 16’ 4” 14’ 3” 5,9457232-35(NC)* 35’ 3 1 – 45”, 4 – 60” & 2 – 75” 16’ 4” 15’ 6” 6,6157232-32* 32’ 6” 3 2 – 45”, 4 – 60” & 1 – 75” 18’ 10” 12’ 9” 5,9457232-35* 35’ 3 1 – 75” & 6 – 60” 18’ 10” 14’ 3” 6,6157232-37* 37’ 6” 3 3 – 75” & 4 – 60” 18’ 10” 15’ 6” 6,9207252-32*** 32’ 6” 5 3 – 45”, 2 – 60” & 2 – 75” 17’ 4” 11’ 3” 6,2207252-35*** 35’ 5 1 – 45”, 4 – 60” & 2 – 75” 17’ 4” 11’ 3” 6,7907252-37*** 37’ 6” 5 1 – 45”, 2 – 60” & 4 – 75” 17’ 4” 11’ 3” 7,1707252-40*** 40’ 5 4 – 60”, 1 – 75” & 2 – 90” 19’ 10” 12’ 6” 7,7407252-42*** 42’ 6” 5 2 – 60”, 3 – 75” & 2 – 90” 19’ 10” 12’ 6” 8,1207252-45*** 45’ 5 2 – 60”, 1 – 75” & 4 – 90” 19’ 10” 12’ 6” 8,6907252-45*** 45’ 5 8 – 60” & 1 – 75” 19’ 10” 15’ 8,8507252-47*** 47’ 6” 5 6 – 60” & 3 – 75” 19’ 10” 15’ 9,1407252-50*** 50’ 5 6 – 60”, 1 – 75” & 2 – 90” 19’ 10” 15’ 9,580NC = Narrow Center*Cutting width can be decreased as much as 15" on each end of the machine for a total of 30".**Cutting width can be decreased as much as 6" on each end of the machine for a total of 12".***Cutting width can be decreased as much as 12" on each end of the machinefor a total of 24".11