primary tillage tools 4213 coulter chisel - AGCO Iron

There is only one. the original. Sunflower.primary tillage tools4213, 4233, 4412, 4511, 4530, 2433, 7200Model 4530 disc chiselModel 4412 disc ripperModel 4213 coulter chiselwww.sunflowermfg.com • 1-800-748-8481

primary tillage toolsYEARLIMITEDWARRANTY4213 coulter chiselThe newly redesigned 4213 from Sunflower is the answer for removing soil compaction while opening up the surface forimproved water intake and reduced erosion. This coulter chisel can completely fracture hardpans and soil compaction toa depth of 12"-14" (305-356 mm) that a wider spaced shank arrangement would miss. With coulters spaced every 7-1/2"(191 mm) and shanks on 15" (381 mm) centers, not much gets by this complete chisel.4213 shank optionsRigid ShearBoltA maximum point load of1,500 lbs. (680 kg) with arange of points to controlresidue.Auto-ResetA maximum pointload of 1,500 lbs. (680kg) with a vertical tripheight of 13" (330 mm).

There is only one. the original. Sunflower.4213 Coulter Chisel features.Optional offsetshank modulesCan be added to therear bar of the machine,providing even moreclearance for demandingresidue.Standard WalkingTandemsMinimize frame bounceand uneven penetration.HEAVY-DUTY TRASHBARSHeavy-duty 3" (76 mm)wide channel iron trashbars are mounted betweeneach coulter blade to helpkeep the gangs clear ofresidue and dirt buildup.C-Flex coultergang hangersShock-absorbing mountsprotect against field obstructions.Spring end collarshelp ensure the gang staysproperly torqued. Coultergangs eliminate pluggingor need for shredding ordiscing before ripping.Single or DoubleClevis AdjustablehitchEither a single or doubleclevis adjustable hitch isavailable to allow frontto-rearleveling of themachine.HEAVY-DUTY SEPARATINGSPOOLSEach spool weighs 50 lbs., (23 kg)enough weight to slice throughheavy residue. Gangs feature tworephasing lift hydraulic cylinders(protected by shock-absorbingmounts) to control the frontgang depths with on-the-goadjustments.4213 coulter CHISELHEAVY-DUTY FRAMEAn all welded 4" x 6" x 3/8"(102 x 152 x 11 mm) frame withspecial formed gussets in all highstress areas. UHMW technologyaround the rock shafts meansno greasing needed and lessparts wear.Well braced over the tophitchAll coulter chisels are fitted withoverhead truss hitches providingdown pressure to ensure noframe bounce.20" (508 mm) coulterbladesSpaced on 7-1/2" (191 mm) centerswith long-life, trunnion-typebearings. Pre-fracture the soil andsize residue ahead of 15" (381mm) spaced chisel shanks at12"-14" (305-356 mm) maximumdepth. Equipped with 1 3/4" (44mm) gang shafts.MODELCutting Width ft (m)Number of ShanksShank Spacing in (mm)Tranport Width ft (m)Number of CoultersEst. Weight Rigid Shanks lbs (kg)Est. Weight Auto Reset lbs (kg)4213-78.-9 (2.7)715 (381)9-8 (3)146,068 (2752)6,760 (3066)4213-911-3 (3.4)915 (381)10-11 (3.3)186,632 (3008)7,522 (3412)4213-1113-9 (4.2)1115 (381)14-3 (4.3)227,602 (3448)8,690 (3942)4213-1316-3 (5)1315 (381)16-2 (4.9)268,162 (3702)9,448 (4286)4213-1518-9 (5.7)1515 (381)18-9 (5.7)309,202 (4174)10,692 (4850)Note: Above specifications may vary slightly based on tires, hydraulic system, or other possible variances.We are continually striving to improve our machines; therefore, these specifications are subject to change without notice.www.sunflowermfg.com • 1-800-748-8481

primary tillage toolsYEARLIMITEDWARRANTY4233 coulter chiselDon’t take a chance of not getting over your ground in the fall after harvest. With today’s short windows, there are timeswhen you are hard-pressed to complete all of your fall tillage. This means possibly leaving it until spring and taking a chanceof delayed planting of next year’s crop. The 4233 coulter chisel from Sunflower is the answer for today’s larger farmers withhigher horsepower tractors.4233 shank optionsRigid ShearBoltA maximum point load of1,500 lbs. (680 kg) with arange of points to controlresidue.Auto-ResetA maximum point loadof 1,500 lbs. (680 kg)with a vertical trip heightof 13" (330 mm).

There is only one. the original. Sunflower.4233 Coulter Chisel features.Optional offsetshank modulesStandard WalkingTandemsHEAVY-DUTY TRASHBARSC-Flex coultergang hangersSIMPLE, EASYADJUSTMENTCan be added to therear bar of the machine,providing even moreclearance for demandingresidue.Minimize frame bounceand uneven penetration.Heavy-duty 3" (76 mm) widechannel iron trash bars aremounted between eachcoulter blade keeping thegangs clear of residue anddirt buildup.Shock-absorbing mountsprotect against fieldobstructions. Springend collars help ensurethe gang stays properlytorqued. Coulter gangsminimize plugging orneed for shredding ordiscing before ripping.Single point depth controlfor a simple, easy adjustment.Sets the depth for theentire machine from oneconvenient location.FLEXIBLE FRAMESDesigned with flexible frames forall types of terrain and folds toa narrow 14'6" (4.4 m) transportwidth.HEAVY-DUTY FRAMEAn all-welded 4" x 6" x 3/8"(102 x 152 x 11 mm) framewith special formed gussets inall high stress areas. UHMWtechnology around the rockshafts means no greasingneeded and less parts wear.Single or DoubleClevis AdjustablehitchEither a single or doubleclevis adjustable hitch isavailable to allow front-to-rearleveling of the machine.4233 coulter CHISELHEAVY-DUTY SEPARATING SPOOLSEach spool weighs 50 lbs. (23 kg),enough weight to slice through heavyresidue. Gangs feature two rephasinglift hydraulic cylinders (protected byshock-absorbing mounts) to controlthe front gang depths with on-the-goadjustments.Operation:• Leave more residue byswitching from twistedshovels to straight points.• Run the shanks 1-2”(25-50 mm) below thecompacted layer.MODELCutting Width ft (m)Number of ShanksShank Spacing in (mm)Transport Width ft (m)Transport Height ft (m)Number of CoultersEst. Weight Rigid Shanks lbs (kg)Est. Weight Auto Reset lbs (kg)4233-1721-3 (6.5)1715 (381)14-6 (4.4)10-3 (3.1)3412,804 (5808)14,487 (6571)4233-1923-9 (7.2)1915 (381)14-6 (4.4)11-7 (3.5)3813,410 (6083)15,291 (6936)4233-2126-3 (8)2115 (381)14-6 (4.4)13-1 (4)4214,364 (6516)16,443 (7459)Note: Above specifications may vary slightly based on tires, hydraulic system, or other possible variances.We are continually striving to improve our machines; therefore, these specifications are subject to change without notice.4233-2328.-9 (8.8)2315 (381)14-6 (4.4)14 (4.3)4614,770 (6700)17,047 (7733)www.sunflowermfg.com • 1-800-748-8481

primary tillage toolsYEARLIMITEDWARRANTY4412 disc ripperThe 4412 discs and rips your field at the same time, providing all your fall tillage needs in a single pass … plus finishesthe job with unmatched leveling ability. A key to the 4412’s performance is the patented* C-Flex mounted disc bladesfixed at a compound angle which can react quickly and efficiently to obstacles found in the field. This patented* compoundangled disc arrangement is very aggressive in burying trash and has also demonstrated excellent clean-out ability in wetconditions.*Patent # 6,158,5234412 shank optionsAuto-Reset Parabolic ShanksA maximum point load of 3,500 lbs. (1588 kg) withoperating depths of up to 16"-18" (406-457 mm).Parabolic shanks provide a wider shattering patternand require less draft than a straight shank.

There is only one. the original. Sunflower.4511/4530 Disc Chisel features.Hydraulic front and reargangsVary the amount of residue thatcan be buried and fine-tune themachine from field to field. Depthgauge on front and rear gangscan be seen from the tractor seatfor added convenience to theoperator.C-Flex mounted discbladesPatented* individual C-Flexmounted disc blades provideadditional rock protection, andallow you to work in wetter conditions,when compared to asolid front gang.Self-leveling hitchSelf-leveling hitch and front-to-rearleveling - once set the 4511/4530will remain level both in and out ofthe ground.Depth GaugesDisc depth gauges both front andrear are visible from tractor seat.Patented* C-FlexshieldingStops soil transfer from one discto the next. Reduces plugging ofwet materials and trash.4511 disc chiselExclusive parallel linksParallel links connect both thefront and rear disc gangs to themain frame. Links allow the discgangs to run level no matter theheight adjustment.Single Point DepthControlFront mounted single point depthcontrol sets the depth for theentire machine.UHMW polymer sleevesSpend more time in the fieldand less time with daily maintenance.Maintenance-freeUHMW polymer sleeves on thelift system require no greasing,and improve overall performanceof the machine.MODELCutting Width ft (m)Transport Width ft (m)Transport Height ft (m)Number of ShanksShank Spacing in (mm)Number of Blades F/RBlade Spacing F/R in (mm)Tires & SizeEstimated Weight lbs (kg)4511-911-3 (3.4)13-9 (4.2)6-8 (2)915 (381)12/1612/10.5 (326/267)(4) 12.5Lx15(318x381)13,160 (5969)4511-1113-9 (4.2)17-2 (5.2)6-8 (2)1115 (381)14/2012/10.5 (326/267)(4) 12.5Lx15(318x381)14,385 (6525)4511-1316-3 (5)16-9 (5.1)8-9 (2.7)1315 (381)18/2212/10.5 (326/267)(4) 12.5Lx15(318x381)16,680 (7566)Note: Above specifications may vary slightly based on tires, hydraulic system, or other possible variances.We are continually striving to improve our machines; therefore, these specifications are subject to change without notice.4511-1518-9 (5.7)18-8 (5.7)10-3 (3.1)1515 (381)20/2812/10.5 (326/267)(4) 12.5Lx15(318x381)17,900 (8119)4530-1923-9 (7.2)18-1 (5.5)11-7 (3.5)1915 (381)24/3212/10.5 (326/267)(4) 12.5Lx15(318x381)24,360 (11050)www.sunflowermfg.com • 1-800-748-8481

primary tillage toolsWhen you’re pulling the Sunflower 7200 soil conditioner behind a primary tillage tool, you will notice improvedeffectiveness of the host machine and smoother conditions after each pass. The 17” (432 mm) diameter Chevron reelswill break up clods, knock soil from the root crowns and will level up the surface left behind your primary tillage tool.No one else offers the exclusive features found standard on the Sunflower 7200 soil conditioner. Wings that flex bothup and 10 degrees below level. Adjustable wing sections that allow the soil conditioner to be tailored to the width ofthe host machine. Overlapping gangs to condition soil completely across the entire machine reducing any misses. Andyou won’t find C-Flex mounted Chevron reels on the competition either. All of these features will make your secondarytillage pass much smoother.7200 soil conditioner7200 soil conditionerSERIESNUMBER721272327252NumberOFMODELS41112NumberOFSECTIONS135WORKINGWIDTHSft (m)15 (4.6) to22-6 (6.9)18 (5.5) to37-6 (11.4)32-6 (9.9) to56 (17.1)REELDIAMETERin (mm)17 (432)17 (432)17 (432)TRANSPORTWIDTHft (m)16 (4.9) to23-6 (7.2)13-6 (4.1) to18-10 (5.7)17-4 (5.3) to19-10 (6)TRANSPORTHEIGHTft (m)NA8-10 (2.7) to15-6 (4.7)11-3 (3.4) to15 (4.6)ESTimatedWEIGHTlbs. (kg)2781 (1261) to3224 (1462)3890 (1765) to6920 (3139)6220 (2821) to10192 (4623)Note: Larger 5-Section models available to accommodate different machine types.Note: Above specifications may vary slightly based on tires, hydraulic system, or other possible variances.We are continually striving to improve our machines; therefore, these specifications are subject to change without notice.

FinishingAttachments that ImprovePerformance.Sunflower has rolling treader attachments leveland firm the soil behind the coulter chisel. Inspring operations, it’s even capable of seedbedpreparation. The rolling treaders feature anexclusive tooth design and greaseable triple lipsealed bearings. This attachment is designed fordryer conditions and stone free applications.Available for: 2433, 4213/4233Leveling action is also accomplished with theexclusive five-row spike drag attachment. Thefive-row spike drag features 11" x 3/4" (279 x 19mm) spikes mounted on 1-3/4" (44 mm) centers.The unique link that connects the bars togetherallows the unit to conform to very irregular terrainand step over accumulated residues.Available for: 4213/42333-Row Spike Drag available for: 2433Sunflower’s most aggressiveattachment is our chopper reel whichcan size residue, break up clods andlevel out-of-condition soil.Available for: 4110, 4213/4233FOR MORE INFORMATION:1-800-748-8481 • (785) 738-2261 • FAX (785) 738-2406Internet - www.sunflowermfg.com • E-mail - sales@sunflowermfg.comSunflower Manufacturing Co., Inc.P.O. Box 566 • 3154 Hallie Trail • Beloit, KS 67420PRINTED IN U.S.A.SF09048 RP 09 (01) 5 BAC