Operating instructions PB-L line of balances - METTLER TOLEDO
Operating instructions PB-L line of balances - METTLER TOLEDO
Operating instructions PB-L line of balances - METTLER TOLEDO
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Ono fO/TCME TLER <strong>TOLEDO</strong>3 Weighing3.1 On/<strong>of</strong>f switchingOn88888888à0.00 gSwitching on➞ Remove any load from weighing pan and press «On» key briefly.The balance performs a display test (all segments in the display light up briefly).When zero is displayed, the balance is ready for operation.OffOFFSwitching <strong>of</strong>f➞ Press and hold the «Off» key down until “OFF” appears in the display. Release the key.à3.2 Simple weighing0.00 g➞ Place weighing sample on the weighing pan.• 1182.03 g➞ Wait until the stability detector “•” disappears.F Cal/Menu1250.00 g➞ Read the result.11