Operating instructions PB-L line of balances - METTLER TOLEDO
Operating instructions PB-L line of balances - METTLER TOLEDO
Operating instructions PB-L line of balances - METTLER TOLEDO
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Ono fO/TCF Cal/MenuME TLER <strong>TOLEDO</strong>2 Startup2.1 Unpacking / standard equipmentAll <strong>PB</strong>-L <strong>balances</strong> are supplied in environmentally compatible packaging. The standard equipment for everybalance comprises:• AC adapter, to national codes• Weighing pan with pan support or draft shield element• Transparent plastic protective cover, fitted, to keep your balance clean at all times• Retaining ring for protective cover, fitted, only on <strong>balances</strong> without draft shield• Draft shield, standard supply for models <strong>PB</strong>xx3-L (for other models a draft shield is available as anoptional extra) (see Section 6.4 Optional equipment)• <strong>Operating</strong> <strong>instructions</strong>, to ensure optimum utilization <strong>of</strong> your balance's capabilities• CE declaration <strong>of</strong> conformity (in separate brochure 11780294)2.2 Cautionary notes• <strong>PB</strong>-L <strong>balances</strong> must not be operated in hazardous areas with the standard-supply AC adapter.• Before connecting the AC adapter, verify that the voltage printed on it corresponds to the local mains voltage.If this is not the case, please contact your local <strong>METTLER</strong> <strong>TOLEDO</strong> dealer.• <strong>PB</strong>-L <strong>balances</strong> may only be used indoors in a dry environment.• Use only with a tested AC adapter with limited and SELV output current.7
Change language