Thermocouple Assembly
Thermocouple Assembly
Thermocouple Assembly
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Thermocouple</strong> <strong>Assembly</strong>Follow these instructions to connect a thermocouple to your miniature connector:1. Unscrew and remove the top of the miniature connector.2. Remove the rubber washer from the miniature connector and slide it over the tip of thethermocouple wire.3. Partially loosen the inside screws.4. Insert the wires under the appropriate screws and tighten.a. K-Type thermocouples: Yellow to +, Red to -b. J-Type thermocouples: White to +, Red to -c. T-Type thermocouples: Blue to +, Red to -
5. Place the top back on the miniature connector and tighten the screws.<strong>Thermocouple</strong> <strong>Assembly</strong>2 Product Links: Data Acquisition | Data Logger | Chart Recorder | <strong>Thermocouple</strong> | Oscilloscope
Change language