LD STINGER SERIES - Notape

ACTIVE SYSTEMS FEATURES:1 MICROPHONE INPUTBalanced XLR microphone input.2 GAIN MICROAdjust the input sensitivity of the microphone input with this gain control. Please regard that microphonesneeding phantom power (condenser microphones for example) will not work at these inputs since they donot supply a phantom power.ENGLISH3 LINE INPUTSBalanced XLR line input (mono).4 GAIN LINEAdjust the input sensitivity of the line input with this gain control.5 LINE OUTPUTSBalanced XLR output (mono). The two inputs (mic and line inputs) are mixed together according to the adjustedlevels and sent to this output. You can use this output to split the mixed inputs out to another activespeaker or amplifier.6 VOLUME MASTERThis is the master volume control. You can adjust the overall volume of the amplifier–unit.7 TREBLEThe treble control allows you to pad or boost high frequencies by -12dB respectively +12dB. (This function isnot available on the 8” and 10” models)DEUTSCHFRANCAIS8 BASSThe bass control allows you to pad or boost low frequencies by -12dB respectively +12dB.9 PROTECTThis LED lights up in case of a over-heating of the systems. The amplification module is then automaticallyshut off. If this problem should occur often please contact your dealer or the servicing department.10 CLIPThis LED indicates the Class D power amps’ peak limiter has engaged to attenuate a maximum outputvoltage excursion, or put simply, a clipping signal.11 SIGNALThis LED lights up when the unit detects an incoming signalFRANCAIS POLSKIFRANCAIS español7