Assembly instruction for stand for Dual Board 1279 ... - eInstruction
Assembly instruction for stand for Dual Board 1279 ... - eInstruction
Assembly instruction for stand for Dual Board 1279 ... - eInstruction
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Attaching the mount to the wall1.400 mm1.400 mm1.300 mm277 mm277 mmFloor1. Mark the position of the 4 holes on the wall:- lower holes at appr. 51“ from the floor- lateral distance between the holes: 55.1“- vertical distance between holes: 19.1“2. Drill the holes, using a 12mm drill3. Fix the mount to the wall, using the correcthardwareMounting hardware <strong>for</strong> wall mounting is NOT included.It´s the responsibility of the installer to verify compliance with all local building codes andto ensure that the supporting wall surface will safely support the combined load of allequipment and that the proper mounting hardware is being used.11<strong>Assembly</strong> <strong>instruction</strong> <strong>for</strong> AdjustIt Pro <strong>stand</strong>
Change language