Manual - One Stop Rental

SPECIFICATIONS 33.1 SPECIFICATIONSDimensions:Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38” (965 mm)Length . . . . . . . . . . . . . . . . . . . . . . . . . . 48” (1,219 mm)Height (transport) . . . . . . . . . . . . . . . . 47” (1,194 mm)Height (aerate) . . . . . . . . . . . . . . . . . . . . . 38” (965 mm)Net Weight:Dry, w/o acc. weight . . . . . . . . . . . . 218 lbs. (99.0 Kg)Dry, w/ acc. weight . . . . . . . . . . . . 268 lbs. (121.7 Kg)With water tank fulland acc. weight . . . . . . . . . . . . . . . 339 lbs. (153.9 Kg)Speed:Transport . . . . . . . . . . . . . . . . . .Aerate . . . . . . . . . . . . . . . . . . . .190 f.p.m. (58 M.p.m.)225 f.p.m. (69 M.p.m.)Engines:Model 544883AHonda, 4.0 h.p., 4 cycleModel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GX120K1HXStarter . . . . . . . . . . . . . Recoil, w/ rotating on/off switchGovernor . . . . . . . . . . . . . . . . . . . . . 3600 RPM, no loadIdle Speed . . . . . . . . . . . . . . . . . . . . . 1400 ± 100 RPMFuel Tank . . . . . . . . . . . . . . . . . . Metal, .66 gal. (2.5 L)Gear Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 to 1Model 544886Briggs & Stratton 3.5 h.p., 4 cycleModel . . . . . . . . . . . . . . #093452, Type 0141, Trim .01Starter . . . . . . . . . . . . . Recoil, w/rotating on/off switchGovernor . . . . . . . . . . 3600 RPM ± 100 RPM, no loadIdle Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 RPMFuel Tank . . . . . . . . . . . . . . . . . . . . . Metal, 4 qt. (3.8 L)Gear Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 to 1Speed Reduction to Aerating Tine Wheel . 8.75 to 1Drive:Primary . . . . . . . . . . . . . . . . . . . . . . . . V Belt, 4L sectionSecondary & Transport . . . . . #40 sealed roller chainWheels:Front . . . . . . . . . . . . . . . 11” (279 mm) Dia. water tank10.2 gal. (9.7 L) max. capacityRear . . . . . . . . . . . 2.80 / 2.50-4 4 ply pneumatic tiresand sealed ball bearingsAeration:Tines . . . . . 3/4” (19mm) formed from .08” hardenedchromemolybdenum alloy steel, 42 per unitPenetration Depth . . . . . . . . . . . 2 3/4” (70 mm) max.Swath Width . . . . . . . . . . . . . . . . . . . 26 1/2” (673 mm)Hole Pattern . . . . 3 3/4” x 7” (95 x 178 mm) on centerProduction . . . . . . . . . . . . . Up to 29,300 sq. ft. / hour3