Staffa/Kawasaki Product info in Pdf format - Airline Hydraulics

MotorsIndustrial ProductsB045 Shaft SpecificationShaft type “P”, Parallel keyed shaftShaft type “S”, Involute spline, 17 teeth to BS3550Shaft type “Z”, Involute spline to DIN 5480Shaft type “Q”, Internal Involute spline, 21 teeth to BS 3550B045 SHAFT VARIATIONSSHAFT TYPE 'P'CYLINDRICAL SHAFT WITH KEYSHAFT TYPES 'S'17 SPLINES TO BS 3550-1963KEY (SUPPLIED):14.046/14.028 WIDE9.04/8.96 THICK14.05414.011SHAFT TYPES 'Z'17 SPLINES TO DIN 5480141.8140.4MOUNTING FACE88 55.715.59Ø55.01154.981MOUNTING FACE10071 MIN STRAIGHT1/2"-20 UNF-2B X 32FULL THREAD DEPTH1/2"-20 UNF-2B X 32FULL THREAD DEPTH100141.8140.4SHAFT TYPE 'Q'FEMALE SHAFT WITH 21 SPLINES TO BS 355055.555.05 10SPLINE DATAFOR SHAFT TYPE 'S'TO BS 3550-1963 & ANSI B92.1,1970FLAT ROOT SIDE FIT, CLASS 1PRESSURE ANGLE 30 °NUMBER OF TEETH 17PITCH 8/16MAJOR DIAMETER 56.41/56.28FORM DIAMETER 50.703MINOR DIAMETER 50.07/49.60PIN DIAMETER 6.096DIAMETER OVER PINS 62.985/62.931FOR SHAFT TYPE 'Z'DIN 5480, W55 X 3 X 17 X 7hSPLINE DATAMOUNTING FACE41.840.3Ø50.450.2INTERNAL SPLINE TO BS 3550-1963FLAT ROOT SIDE FITPRESSURE ANGLE 30 °NUMBER OF TEETH 21PITCH 12/24MAJOR DIAMETER 46.566/46.896FORM DIAMETER 46.144MINOR DIAMETER 42.334/42.461PIN DIAMETER 3.658PIN FLATTED TO 3.556DIMENSION BETWEEN PINS 39.169/39.103ModelStaffaPage38.70Data SheetM-1001/03.00Issue 03/00