Facom Best Sellers Brochure Euro 2012.pdf - E. Fox (Engineers)

SINGLE FULL DOORS - TOP- 2 swing doors, mounted on invisible wire hingesopening to 110°. The doors have been testedover 10000 open/close cycles- 2 painted shelves. Epoxy adjustable height.Capable of supporting a load of 20 kg- Quickly and easily fitted to a base unit usinga "KIT-TUBES" or "KIT-TUBESUP" fitting kit- Dimensions: L. 719 x D. 277.8 x H. 810 mm- Weight: 27.5 kgSINGLE GLAZED DOORS - TOP- Transparent doors allow you to check immediatelyon equipment, storage and cleanliness- These cabinets are ideally suited for applicationof the 5S rule:SEIRI (clear away), SEITON (store),SEISO (clean), SEIKETSU (specify storage rules),SHITSUKE (ensure compliance)- Transparent swing doors made of Plexiglassthickness 3 mm, opening to 110°. The doors aretested over 10000 open/close cycles- 2 Epoxy painted shelves with adjustable height.Capable of supporting a load of 20 kg- Quickly and easily fitted to a base unit usinga "KIT-TUBES" or "KIT-TUBESUP" fitting kit- Dimensions: L. 719 x D. 277.8 x H. 810 mm- Weight: 26 kgWALL UNIT - 1 DRAWER - 810 MM HIGH- Compact and efficient, this cabinet allows multiple storage organisation options.- Cabinet with vertical hanging and drawer sections- Vertical hanging section:- Storage surface area: 1 m²- The bottom and the sides of the cabinet, as well as the door linings are perforated for hangingtools using the CKS system- The two door leaves open to 180° for maximum visibility and accessibility- Drawer section:- 1 fully-opening drawer with ball-bearing slides- Effective drawer dimension: 569 x 60 x 210 mm- Central key locking of doors and drawer- Wall-mounted (through holes provided) or supported on the workbench- Weight: 31 kg- Dimensions: L. 719 x D. 277.8 x H. 810 mmMHSPP€ 732.06MHSPV€ 817.062201PB€ 768.50DOUBLE GLAZED DOORS - TOP- The double unit can be used for storing tools and/or items which are long and bulky which cannot be fittedin a standard unit- The vertical hooking panels offer visibility and direct access to tools- Transparent doors allow immediate checking on equipment, storage and cleanliness- 2 transparent plexiglass sliding doors thickness 3 mm- Equipped with a perforated panel (6 x 6 mm in 12 mm steps) for fixing tools using the CKS range of hooks(see the range in the F08 catalogue).- Quickly and easily fitted to a base unit using a "KIT-TUBES" or "KIT-TUBESUP" fitting kit- Dimensions: L. 1446.4 x D. 277.8 x H. 810 mm- Weight: 31 kgOPEN CORNER- Ideal complement to the base corner unit foroptimised layout of normally unused space- 2 Epoxy painted shelves with adjustable height,capable of supporting a 20 kg load- Quickly and easily fitted to a base unit using a"KIT-TUBES" or "KIT-TUBESUP" fitting kit- Dimensions: L. 815 x D. 391.6 x H. 810 mm- Weight: 13.5 kgOPEN TOP CORNER BOX- Open box for quick access- Ideal for storage of documentsor of consumables- Ideal complement to the base corner unitfor optimised layout of normally unused space- Admissible load 30 kg- Quickly and easily fitted to a base unit usinga "KIT-TUBES" or "KIT-TUBESUP" fitting kit- Dimensions: L. 815 x D. 391.6 x H. 405 mm- Weight: 10 kgMHDPV€ 1390.81MHA€ 562.06CHA€ 323.00www.facom.com27