Facom Best Sellers Brochure Euro 2012.pdf - E. Fox (Engineers)

ELECTRICITYPRODUCTION CRIMPINGPLIERS FOR INSULATEDTERMINALS- To IEC 760- Extended handle for two-hand use- Pliers can be released while crimping- Dual crimp- Comfortable grips- Capacity: 0.75 - 6 mm²- Length: 255 mm- Weight: 540 gAUTOMATIC SIDE-ENTRYWIRE STRIPPERS- High precision stripping, one diameterfor each conductor- Capacity: 1.5 - 4 mm²- Notch: 0.6 - 0.8 - 1 - 1.2 - 1.6 - 2 - 2.5 mm- Weight: 370 gAUTOMATIC CUTTINGSTRIPPER- Suitable for single or multi-core cables, self-settingto wire gauge- Stripped-length thumbwheel adjustment- Spare blades 162-L1.- Cuts and strips in one go- Capacity: 0.4 - 4 mm²- Length: 160 mm- Weight: 340 g985753 € 165.31 986058€ 58.03985761€ 109.02NEW1000 VOLT INSULATEDTORQUE WRENCH- Easy to set and read!- Excellent repeatability and accuracy: ± 4%(during 5000 cycles)- Re-calibratable wrench- Compliant with the CEI 60900 standardon insulated tools- Compliant with the ISO 6789 -DIN EN ISO 6789 - NF EN ISO 6789- Standard on controlled tightening tools- Supplied with a calibration certificate- Square: 3/8"- Reliability: 50000 cycles- Capacity: 10 to 50 Nm- One-way wrench- Length 132 mm- Weight: 1.3 kg (single wrench)SET FOR PSA ELECTRICVEHICLE TOOLKIT- One set for Peugeot iOn and Citroën C-zero- Composition of the kit- 1000 volt ratchet 3/8"- Four 1000 volt insulated sockets 10, 11, 12,13 mm- One 1000 volt insulated extension 3/8"- One 1000 volt open end wrench- One pair of 1000 volt insulated half-round pliersHYBRID AND ELECTRIC VEHICLE TOOLKIT- Set of 1000 volt insulated 3/8" ratchet sockets- 6 sockets: 8, 10, 11, 12, 13, 14 mm- Insulated T handle 3/8"- Two insulated offset wrenches 10 and 12 mm- Two 1000 volt insulated flat blade screwdriver 5.5 x 125, Philips 2 x 125- Insulating gloves size 10. Standard EN 60903 directive CE/89/686 category C resistant to acid and ozone- One pair of protection over-gloves size 10 Directive CE/89/686- One multitester voltage 12-690 volts. Used to check the presence of voltage on a circuit before starting work,in accordance with NF EN 61010- 600 V cat 3 and IEC 61243-3 (VAT/DDT)- Neutral phase detection, continuity test, test of differential circuit breaker 30 mA- One “plastic“ toolbox, can be locked with a padlock, length 650 mmJ.306-50VSE€ 376.13CM.ELPSAPB € 285.81 CM.HYELPB € 593.9446