Facom Best Sellers Brochure Euro 2012.pdf - E. Fox (Engineers)

TORQUE TESTER- Quick & easy:- Very easy to use with minimum set-up requirements- Comes with complete calibration certificate ISO6789- 3 tools in series to cover a large range of torque from 2-1000 Nm- Precision: ± 1% ± 1 digit- Measuring unit: N.m, ft.lb ; in.lb- Measurement methode: follower, crest and peak- Preset torque levels available with LED indication- PC link: RS232- Supplied with calibration certificate- Dimensions: 170 x 155 x 90 mmTORQUEWRENCHESE.2000-50UKE.2000-350UKE.2000-1000UK€ 1279.06€ 1400.87€ 1583.59NmMin - maxLE.2000-50UK 2 - 50 3/8"E.2000-350UK 10 - 350 1/2"E.2000-1000UK 100 - 1000 27 mmELECTRONIC TORQUE WRENCH- Performances:- High performance even under intensive use: accuracy: ± 2% ± 1 digit- Can be preset to 9 torque values to allow a staged tightening procedure- USB connection allows storage of 250 values- Ergonomic:- LEDs remain visible, even where access is difficult- Ultra simple to use: self test and reset when switched on- Visual and audible indications (LEDs and beeper)- Accuracy:- ISO 6789 - DIN EN ISO 6789 - NF EN ISO 6789- Accuracy: ± 2% from 20% to 100% of full scale reading- Measuring mode: peak or trace- Measuring units: N.m, ft.lb, in.lb, kg.cm- End fittings: 9 x 12 or 14 x 18- Numbered and supplied with a calibration certificate ISO 6789- Supplied in a foam-lined plastic caseELECTRONIC TORQUE & ANGLE WRENCH- Performances:- High performance even under intensive use: accuracy: ± 2%- Can be preset to 9 torque values to allow a staged tightening procedure- USB connection allows storage of 250 values- Torque and angle tightening in 1 tool: productivity,error proofing (digital reading) and accuracy- Ergonomic:- LEDs remain visible, even where access is difficult- Ultra simple to use: self test and reset when switched on- Visual and audible indications (LEDs and beeper)- ISO 6789 - DIN EN ISO 6789 - N F EN ISO 6789- Accuracy:- Torque: ± 2% from 20% to 100% of full scale reading- Angle: ± 2°- End fittings 9 x 12 or 14 x 18- Measuring mode: peak or trace- Measuring units: N.m, ft.lb, In.lb, Kg.cm, degree- Possibility to lock the keyboard: the operator will then only haveaccess to the choice of programmes and data storage of the results- Supplied with calibration certificate in a plastic case and foam trayElectronic TorqueWrenchNmMin - maxEnd fittings L Ratchet DimensionsE.306A30RPB 30 Nm 1.5 - 30 9 x 12 1/4" R.372 390 mmE.306A135JPB 135 Nm 6.7 - 135 9 x 12 3/8" J.372V 415 mmE.306A135SPB 135 Nm 7 - 135 9 x 12 1/2" S.372V 415 mmE.306A200SPB 200 Nm 10 - 200 14 x 18 1/2" S.382V 530 mmE.306A340SPB 340 Nm 17 - 340 14 x 18 1/2" S.382V 650 mmElectronic TorqueWrenchNmMin - maxEnd fittings L Ratchet DimensionsE.316A30RPB 30 Nm 1.5 - 30 9 x 12 1/4" R.372 390 mmE.316A135JPB 135 Nm 6.7 - 135 9 x 12 3/8" J.372V 415 mmE.316A135SPB 135 Nm 7 - 135 9 x 12 1/2" S.372V 415 mmE.316A200SPB 200 Nm 10 - 200 14 x 18 1/2" S.382V 530 mmE.316A340SPB 340 Nm 17 - 340 14 x 18 1/2" S.382V 650 mmE.306A30RE.306A135JE.306A135S€ 480.12€ 493.13€ 493.13E.316A30RPBE.316A135JPBE.316A135SPB€ 584.76€ 611.53€ 611.53E.306A200SE.306A340S€ 545.18€ 563.71E.316A200SPBE.316A340SPB€ 686.34€ 702.66www.facom.com49