1998 SSZ Operators MANUAL - Scag Power Equipment

SPECIFICATIONS FOR SCAG SSZ ZERO-TURN RIDERMODELS:SSZ-18CV,SSZ-20CV, SSZ-22CV, ALL SSZ-LTCUTTER DECK SMZ 48, SMZ 52, SMZ 61Type:Floating, adjustable, anti-scalping, hybrid design combinesout-front and belly-mount designsConstruction:10-gauge steel with 7-gauge (3/16") steel skirtTrue Cutting Width:48.0" (122.0 cm), 52" (132.0 cm), 61: (155.0 cm)Cutting Height Adjustment: Hand operated lever adjustment from operator's seat, 1-3/4"to 4-1/2" in 1/2" incrementsSSZ-LT=2-1/4" to 5-1/4" in 1/2" incrementsCutter Blades:.204 thick, milled edge, 5150 alloy steelSMZ 48: Three (3) 16.5" bladesSMZ 52: Three (3) 18 bladesSMZ 61: Three (3) 21" bladesBlade Engagement:Electric blade engagement clutch with control panel switchDischarge Opening:Extra wide 11.5" discharge opening with spring loadeddischarge chuteCaster Wheels:12x 3.5 with quick pin removalSpindles:Heavy duty 1-1/8" top dimension spindle shaft, cast housing,taper roller bearing, low maintenance with top access greasefitting and grease overfill relief poppetSpindle Pulleys:Cast-iron with easily removed taper hubsCutter Deck Belts:B-section with Kevlar cordADDITIONAL SPECIFICATIONSSeat:OPTIONAL ITEMS/ATTACHMENTSGrass Catcher:Mulching Plate:Thick cushion with padded with arm restsSpindle driven GC-SSZ-48 has 48 gallon capacity moldedplastic hopper. GC-SSZ-6KH has 6 HP Kohler auxillaryengine, 48 gallon capacity molded plastic hopper.Steel plate fits over discharge opening. No blade changeor removal required. Installs and removes in the field.APPROXIMATE DIMENSIONS SMZ 48 SMZ 52 SMZ 61Length: 72.0" 77.0" 77.0"Tracking Width: 46.0" 49.0" 49.0"Width: 59.0" 64.5" 73.5"Width (with discharge chute up): 49.0" 53.0" 62.0"Height: 48.0" 51.0" 51.0"Turning Radius: zero zero zeroWeight: 790 lbs. 835 lbs. 865 lbs.Weight with GC-SSZ-48:1060 lbs.Width with GC-SSZ-48 59.0"Length with GC-SSZ-48: 78.0"Weight with GC-SSZ-6KH: 1055 lbs. 1085 lbs.Width with GC-SSZ-6KH: 73.5" 82.5"Length with GC-SSZ-6KH: 83.0" 83.0"NOTE: SSZ-LT models have same specifications as respective models above except the height measurement.Add 1" to the height of the above specification for SSZ-LT models.Date of Issue: September 26, 1996Specifications Subject To Change Without Notice15