FNP300 AC-DC Power Supply Data Sheet - Power-One
FNP300 AC-DC Power Supply Data Sheet - Power-One
FNP300 AC-DC Power Supply Data Sheet - Power-One
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>FNP300</strong> <strong>AC</strong>-<strong>DC</strong> <strong>Power</strong> <strong>Supply</strong> <strong>Data</strong> <strong>Sheet</strong>12V, 24V, 48V Output, 300 WattsApplications Telecommunications equipmentFeatures RoHS lead free solder and lead solder exemptedproducts are available Wide input voltage range 85-264 V<strong>AC</strong> Two outputs (one high current output) Low conducted and radiated EMI(EN 55022 class B) Safety approved to UL/CSA60950-1, EN60950-1 andIEC60950-1 High density design4” x 1.58” x 8.5” cassette Highly-efficient topology I 2 C interface Overtemperature, output overvoltage, and outputovercurrent protection Supervisory signaling Included ORing diode for true redundant operationDescriptionThe <strong>FNP300</strong> Series provides highly-efficient ac-dc power supplies, each with one high current output and anadditional standby output, which can be used in a wide range of applications. Passive current share along withinternal ORing diodes allow the <strong>FNP300</strong>'s to be also used in redundant, hot-swap applications. All models meetinternational safety standards and display the CE Mark for the low Voltage Directive.Model SelectionModelInput VoltageV<strong>AC</strong>Output 1 Output 2 Rated <strong>Power</strong>V o nomV<strong>DC</strong>I o maxA<strong>DC</strong>V o nomV<strong>DC</strong>I o maxA<strong>DC</strong>W<strong>FNP300</strong>-1012 85-264 12 25 12 0.7 310<strong>FNP300</strong>-1024 85-264 24 12.5 12 0.7 310<strong>FNP300</strong>-1048 85-264 48 6.25 12 0.7 310Ordering InformationOptionsRoHS lead solder exemptionRoHS compliant for all 6 substancesSuffixes to Add to Part NumberNo RoHS character required.Add "G" as the last character of the part number.BCD20015-G Rev. AB, 29-Mar-10 Page 1 of 6 www.power-one.com
<strong>FNP300</strong> <strong>AC</strong>-<strong>DC</strong> <strong>Power</strong> <strong>Supply</strong> <strong>Data</strong> <strong>Sheet</strong>12V, 24V, 48V Output, 300 WattsAbsolute Maximum RatingsStresses in excess of the absolute maximum ratings may cause performance degradation, adversely effect longtermreliability, and cause permanent damage to the converter.Parameter Conditions/Description Min Max UnitsInput VoltageContinuousTransient, 60 ms264300V<strong>AC</strong>V<strong>AC</strong>Operating TemperatureAmbient0 55 °CV i min -V i max , I o nom , cooling by internal fanStorage Temperature Non-operational -40 85 °CEnvironmental, Mechanical, & Reliability SpecificationsAll specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted.Parameter Conditions/Description Min Nom Max UnitsOperating Humidity Relative humidity, non-condensing 10 90 %Storage Humidity Relative humidity, non-condensing 5 95 %Shock IEC/EN 60068-2-27, 11 ms 30 g nSinusoidal Vibration IEC/EN 60068-2-62-8 Hz8-200 Hz200-500 Hz7.524milg ng nMTBF MIL-HDBK-217F Notice 2, G B , 25 °C 200 khIsolation SpecificationsThe electric strength test is performed in the factory as routine test in accordance with EN 550116, IEC/EN 60950,and UL 1950 and should not be repeated in the field. <strong>Power</strong>-<strong>One</strong> will not honor any warranty claims resulting fromelectric strength field tests.Parameter Conditions/Description Min Nom Max UnitsInsulation Safety RatingInput/CaseInput/OutputOutput/CaseBasicReinforcedFunctionalElectric Strength Test VoltageInput/CaseInput/OutputOutput/Case2.1214.20.5kV<strong>DC</strong>kV<strong>DC</strong>kV<strong>DC</strong>EMC SpecificationsAll specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted.Parameter Description CriterionElectrostatic Discharge IEC/EN 61000-4-2, level 4 (contact/air) 8/15 kV, criterion BElectromagnetic Field IEC/EN 61000-4-3, level 3 10 V/m, criterion AEletr. Fast Transients / Burst IEC/EN 61000-4-4, level 4 (direct/capacitive) 2/1 kV, criterion BSurge IEC/EN 61000-4-5, level 3 (L/L, L/C) 1/2 kV, criterion BVoltage Dips and Interruptions IEC/EN 61000-4-11 Criterion BRF Conducted Immunity IEC/EN 61000-4-6 10 V<strong>AC</strong>, AM 80%, 1 kHz,criterion AEmissions Radiated/Conducted CISPR 22/EN 55022/EN 61204 Class BHarmonics IEC/EN 61000-3-2 Class BVoltage Fluctuation and Flicker IEC/EN 61000-3-3 PassBCD20015-G Rev. AB, 29-Mar-10 Page 2 of 6 www.power-one.com
<strong>FNP300</strong> <strong>AC</strong>-<strong>DC</strong> <strong>Power</strong> <strong>Supply</strong> <strong>Data</strong> <strong>Sheet</strong>12V, 24V, 48V Output, 300 WattsInput SpecificationsAll specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted.Parameter Conditions/Description Min Nom Max UnitsInput Voltage 85 115/230 264 V<strong>AC</strong>Turn-On Input Voltage Ramping up 70 - 85 V<strong>AC</strong>Turn-Off Input Voltage Ramping down 70 - 85 V<strong>AC</strong>Input Frequency 47 50/60 63 HzInrush Current Limitation 115/230 V<strong>AC</strong> 15/20 A<strong>Power</strong> Factor V i nom , I o nom 0.96Efficiency V i = 230 V<strong>AC</strong>, I o nom <strong>FNP300</strong>-1012<strong>FNP300</strong>-1024<strong>FNP300</strong>-1048838688%Output SpecificationsAll specifications apply over specified input voltage, output load, and temperature range unless otherwise noted.Parameter Conditions/Description Min Nom Max UnitsOutput Voltage Setpoint Accuracy V i = 230 V<strong>AC</strong>, I o1 @ 12.5 A<strong>DC</strong>, T C = 25 °C -0.5 0.5. % V o nom<strong>FNP300</strong>-1012Output Voltage Setpoint Accuracy V i = 230 V<strong>AC</strong>, I o1 @ 3.125 A<strong>DC</strong>, T C = 25 °C -0.5 0.5. % V o nom<strong>FNP300</strong>-1024Output Voltage Setpoint Accuracy<strong>FNP300</strong>-1048V i = 230 V<strong>AC</strong>, I o1 @ 12.5 A<strong>DC</strong>, T C = 25 °C -0.5 0.5. % V o nomOutput Current V1Output Current V2Output Current V1Output Current V2Output Current V1Output Current V2<strong>FNP300</strong>-1012<strong>FNP300</strong>-1012<strong>FNP300</strong>-1024<strong>FNP300</strong>-1024<strong>FNP300</strong>-1048<strong>FNP300</strong>-1048000000250.712.50.76.250.7250.712.750.76.40.7A<strong>DC</strong>A<strong>DC</strong>A<strong>DC</strong>A<strong>DC</strong>A<strong>DC</strong>A<strong>DC</strong>Static Line Regulation V1 V i min -V i max , V i nom , 5-100% I o nom -0.5 0.5 % V o nomStatic Load Regulation V1V i min -V i max , V i nom , 5-100% I o nom -5 5 % V o nom(Droop Characteristic)Hold-Up Time Starting at V i = 230 V<strong>AC</strong>, P o nom 20 msDynamic Load Regulation Load change = 33%, dI o /dt = 2A/svoltage deviationrecovery time-2 2400% V o nomsStart-Up Time V i nom , I o nom 1 sOutput Voltage Ripple and Noise V i nom , I o nom , 20 MHz bandwidth 120 mVppBCD20015-G Rev. AB, 29-Mar-10 Page 3 of 6 www.power-one.com
<strong>FNP300</strong> <strong>AC</strong>-<strong>DC</strong> <strong>Power</strong> <strong>Supply</strong> <strong>Data</strong> <strong>Sheet</strong>12V, 24V, 48V Output, 300 WattsProtectionAll specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted.Parameter Conditions/Description Min Nom Max UnitsInput Fuse Not user accessible 6.3ATInput Transient ProtectionWith varistorOutputNo-load and short circuit proofshort circuit proofoverload (latch style) 110 130Overvoltage Protection Latch style <strong>FNP300</strong>-1012Latch style<strong>FNP300</strong>-1024Latch style<strong>FNP300</strong>-1048Overtemperature Protection Automatic power shutdown at T C = 95 °C115115115130130122% I o nom% I o nom% I o nom% V o nom% V o no% V o noControlAll specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted.ParameterConditions/DescriptionI 2 C Digital BusReports information and monitors alarm functionsPS Seated SignalContact closure to GNDPS Remote Shutdown TTL compatible signal, open collector. <strong>Power</strong> supply enabled at Low or TTL "0"(e.g. by connecting of pin 22 to 0V or GND), andinhibited to latching mode** at High or TTL "1", or leave it open.<strong>AC</strong> fail pre-warning (I 2 C & OC)*Supervisory <strong>AC</strong> input voltage;Pre-warning time >6 ms<strong>DC</strong> fail (I 2 C & OC)*Supervisory under- and overvoltage pre-ORing diode of V1Temperature Warning (I 2 C & OC)*Indicates if unit is operating normally or in overtemperature,Pre-warning time >10 msFan OK (I 2 C & OC)*Indicates if fan is operating or has failedCurrent ShareDroop load characteristic for V1 and V2Status IndicationLEDs: <strong>DC</strong> OK (green), <strong>AC</strong> OK (green)* Signal provided by I 2 C interface or by open collector (OC)** (1) Standard <strong>FNP300</strong> models (without "H" at the end of part number) have latching inhibit function, i.e., once PSU isinhibited, it needs input power re-cycle to allow using enable state again.(2) <strong>FNP300</strong> variants marked with "H" character do have non-latching inhibit function so there's no need tore-cycle input power when enabling unit after inhibit state.FeaturesAll specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted.ParameterFan speed controlµC supply voltage in-/output(Pin 10)Conditions/Description4 fan speed levels depending on inlet temperatureFan speed level and temperature information available on I 2 C digital busIf unit is operating: 5 to 7V is provided at pin 10.If unit is NOT operating, pin 10 is input from a parallel connected unit for µC supply.BCD20015-G Rev. AB, 29-Mar-10 Page 4 of 6 www.power-one.com
<strong>FNP300</strong> <strong>AC</strong>-<strong>DC</strong> <strong>Power</strong> <strong>Supply</strong> <strong>Data</strong> <strong>Sheet</strong>12V, 24V, 48V Output, 300 WattsCharacteristic Curves:Figure 1. Efficiency vs. Output LoadFigure 2. Efficiency vs. Input Voltage and Ambient Temperature, I o = I o nomBCD20015-G Rev. AB, 29-Mar-10 Page 5 of 6 www.power-one.com
<strong>FNP300</strong> <strong>AC</strong>-<strong>DC</strong> <strong>Power</strong> <strong>Supply</strong> <strong>Data</strong> <strong>Sheet</strong>12V, 24V, 48V Output, 300 WattsMechanical <strong>Data</strong>Mechanical <strong>Data</strong> (H, W, D)4” (101.6 mm) x 1.58” (40.1 mm) x 8.5” (215.9 mm)Weight: 2.205 lb (1 kg)Output Connector DescriptionsPIN 13AIRFLOWRear View Connector: Molex (15-06-0241)Output ConnectorDescriptionPinLocationReferenceName12V Output24V Output48V Output4,5,6,16,17,184,5,6,16,17,184,5,6,16,17,18Vo1Vo1Vo112V Output RTN24V Output RTN48V Output RTN1,2,3,13,14,151,2,3,13,14,151,2,3,13,14,15Vo1 RTNVo1 RTNVo1 RTN<strong>AC</strong>-fail, <strong>DC</strong>-fail, Temp.-fail 9 PS_FAIL<strong>Power</strong> <strong>Supply</strong> Present 23 PS_PRSNT_LSignalSerial <strong>Data</strong> Line 11 SDASerial Clock Line 12 SCLAddress Input Line A0 21 AOAddress Input Line A1 20 A15 to 7V 10 µC supply voltage busFAN OK 24 FAN_FAILPS Remote Shut Down 22 PS_RSD_H12V Standby RTN 7 Vo2 RTN / LogicGround / 5 to 7V RTN12V Standby 19 Vo2Address Input Line A2 8 A2NUCLEAR AND MEDICAL APPLICATIONS - <strong>Power</strong>-<strong>One</strong> products are not designed, intended for use in, or authorized for use as criticalcomponents in life support systems, equipment used in hazardous environments, or nuclear control systems without the express writtenconsent of the respective divisional president of <strong>Power</strong>-<strong>One</strong>, Inc.TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending onthe date manufactured. Specifications are subject to change without notice.PIN 1BCD20015-G Rev. AB, 29-Mar-10 Page 6 of 6 www.power-one.com
Change language