are used to : - Tegnologie

More documents

Recommendations

Info

Changing the angle of motionBevel gears, intermesh and change the plane inwhich force is applied and rotary motion takesplace.They are used to transmit rotary motion andtorque where the bevel gear shafts are at rightangles (90 degrees) to each other.The worm and worm wheel also transmittorque and rotary motion through a 90°angle.30
Changing the direction of motion (2)This gearing system is called a rack and pinion. Rotary motion is changed into linear motion and vice versaIf the pinion rotates ina fixed position therack moves in a linearmotion.If the rack remainsstationary therotating pinionmoves along therack in a linearmotion.31
Page 4: Pawl and ratchetA ratchet mechanism
Page 8 and 9: Meshed GearsThe diagram below shows
Page 10 and 11: 2) Dividing the diameter of the fol
Page 12 and 13: ExercisesLook at the image on the l
Page 14 and 15: Gear ratios and simple gear trainsW
Page 16 and 17: What is the Gear ratios of these Ge
Page 18 and 19: a 20-tooth follower will turn three
Page 20 and 21: Working out revolutions per minute
Page 22 and 23: Working out revolutions per minute
Page 24 and 25: Question 1For every revolution of t
Page 26 and 27: BicyclesMany machines usegears. A v
Page 28 and 29: Highest gear: (downhill) is the lar
Page 32 and 33: Movement of the rack & pinionNote:
Page 34 and 35: The Wheel Although they may seem ve
Page 36 and 37: To understand torque you need to kn
Page 38 and 39: Gear torque rules:Torque is a turni
Page 40 and 41: A simple gear train consists of two
Page 42 and 43: Mechanical AdvantageWhen two gears
Page 44 and 45: Question 1Look at the imageon the l
Page 46 and 47: Answers p 12:46
Page 54 and 55: 1. Bevel Gears:a. Have teeth parall

are used to : - Tegnologie

Create successful ePaper yourself

Delete template?

Save as template?