are used to : - Tegnologie

More documents

Recommendations

Info

A simple gear train consists of two gears, gear A and gear B. The diameter of theinput gear A is 20 cm and a force of 5N is transmitted to gear B. What must thediameter of output gear B be so that it produces a torque of 1.75 Nm. Draw adiagram of the gears.40
Look at the drill on the right.The input gear rotatesthrough a distance of 32cm.A output gear of the drillrotates a distance of 4 cm.What force is exerted by thedrill bit if a force of 40N wasapplied to the gear train?41
Page 4: Pawl and ratchetA ratchet mechanism
Page 8 and 9: Meshed GearsThe diagram below shows
Page 10 and 11: 2) Dividing the diameter of the fol
Page 12 and 13: ExercisesLook at the image on the l
Page 14 and 15: Gear ratios and simple gear trainsW
Page 16 and 17: What is the Gear ratios of these Ge
Page 18 and 19: a 20-tooth follower will turn three
Page 20 and 21: Working out revolutions per minute
Page 22 and 23: Working out revolutions per minute
Page 24 and 25: Question 1For every revolution of t
Page 26 and 27: BicyclesMany machines usegears. A v
Page 28 and 29: Highest gear: (downhill) is the lar
Page 30 and 31: Changing the angle of motionBevel g
Page 32 and 33: Movement of the rack & pinionNote:
Page 34 and 35: The Wheel Although they may seem ve
Page 36 and 37: To understand torque you need to kn
Page 38 and 39: Gear torque rules:Torque is a turni
Page 42 and 43: Mechanical AdvantageWhen two gears
Page 44 and 45: Question 1Look at the imageon the l
Page 46 and 47: Answers p 12:46
Page 54 and 55: 1. Bevel Gears:a. Have teeth parall

are used to : - Tegnologie

Create successful ePaper yourself

Delete template?

Save as template?