Dee Zee Tailgate Assist Installation Instructions ... - RealTruck.com

DZ 43100TAILGATE ASSISTCHEVY 1999-2007 (07 CLASSIC ONLY)PARTS LIST:ITEMQTYSHOCK 1POST 1LARGE WASHER 1SMALL WASHER 1MOUNT PLATE 1NUT 2THREAD LOCK TUBE 1TOOLS REQUIRED:13MM WRENCHSTEP 1) STEP 2) STEP 3) STEP 4)Using a 13mm wrench or Install the shock mount plate Remove the cable from the Apply thread lock to thesocket, remove the bolt by the using the bolt removed in the cable bolt. Using a 13mm threads on the post stud.tailgate pivot. previous step. wrench/socket, remove the Install the post stud and largecable bolt.washer where the cable boltwas removed. The fully treadedend installs into the truck.Tighten with a 13mm wrench.

STEP 5) STEP 6)Place the tailgate cable onPlace the shock on the bottom mount and top mount as shown. Install a washer and nylock nut on thethe bolt stud.top post. Install a nylock nut on the mount plate stud.The nuts must be tight enough for the thread to engage the nylon ring in the nut, but not tootight that they prevent the parts from moving freely around the stud.