Sprinter - Silberauto

Something to build on: the Sprinter chassisTo help you implement specific body requirements on a Sprinter basis, we offer theSprinter chassis with both a standard and low frame. With three wheelbases in eachcase and a payload of up to 3070 kg, it is a solid foundation for a diverse range ofbusinesses with a variety of requirements. We offer individual, single-source completesolutions¹) under the name VAN SOLUTION.Good chassis, good basisThe different frame variants allow fast,uncomplicated body assembly. The chassisis also available with a crewcab, whichcan seat up to 7 persons.▸▸▸▸Strong, robust frame design for versatilebody solutionsPre-installation for three-way tipperavailable as an optionSuper-single tyres (for 4.6 t perm. GVW)available as an option, ensuringmore space for special bodies betweenthe wheelsLow-frame chassis²) (upper edge offrame lowered by 205 mm) as a foundationfor particularly challenging bodyvariants, with optional air suspension;3 wheelbases (3600/3850/4100 mm),adapted to typical body dimensionsIndustry bodies and fittings¹)Our Sprinter industry solutions, developedin close collaboration with select bodymanufacturers, are available from a singlesource. This means that you benefit fromthe combined expertise of both the basicvehicle manufacturer and the body manufacturer– and deal with a single adviserat your Mercedes-Benz dealership. Ourservice extends from maintenance, repairsand warranties for the industry-specificvehicle to provision of a replacement vehicle.From professionals for professionals.The Sprinter with refrigeratedor deep-freeze box body¹)The Sprinter is also available from a singlesource as a fully-fitted, box-bodied deliveryvehicle for fresh or frozen food. Severalversions with a wheelbase of 3250 mmand a permissible GVW of 3.5 t are available,and several others with a 3665 mm wheelbaseand a permissible GVW of 3.5 or5.0 t. These offer space for up to 200 Eurocratesor five Europallets. All frozen foodvariants allow in-motion and stationarycooling of up to minus 18° Celsius. Otherfeatures include the liquid-tight, weldedfloor made from barleycorn-design aluminium,a cold curtain, a temperature recorderwith printer and load-securing fittings.The Sprinter with lightweightor plywood box body¹)A broad selection of box bodies is alsoavailable for the Sprinter – from a singlesource. You can choose between twowheelbases, a permissible GVW of 3.5 t or5.0 t and various side panel materials:glass-fibre-reinforced plastic (GRP) with arigid foam insulating core and lightweightsandwich materials are recommendedwhere payload capacity is crucial, whilelight-alloy and GRP-coated plywood areideal for tougher applications. A tail lift isoffered for all box body variants, and aroller shutter and side doors are availablealongside the usual hinged rear doors.The Sprinter as a three-way tipper¹)Three-way tipper bodies made from aluminiumor steel are available for theSprinter with single cab or with crewcab.The extensive, single-source range includeselectrohydraulically operated tipperbodies with load areas of up to 3600 x2100 mm for vehicles with a single caband 3600 x 2050 mm with a crewcab. Thefront wall measures up to 700 mm inheight.¹)The application-specific Sprinter models presentedhere are not available in all European countries.If you have any queries or requests, please contactyour Mercedes-Benz van dealer, who will be happyto provide expert advice²)The low-frame chassis is supplied in cooperation withthe manufacturer AL-KO in a dual-invoice transaction12Application-specific solutions