AS100V2 - Alnet Systems

More documents

Recommendations

Info

AS 100V2(BNC) Hardware Manual6. AS100V2(BNC) Installation Guide. Components- AS100V2(BNC) Capture Card- 2PIN Cable (For Watchdog). Option Components- AudExt1 Card- ConExt1616 Card- ConExt1200 Card- ConExt0012 Card- ConExt1604 Card- ConExt0404 Card- PTZExt2 Card Option Components are optional. User can select DI/DO extension card amongthe above. Cables are provided with the selected DI/DO ext cards.. Hardware Installation(1) As the below, connect AS100V2(BNC) Card to AudExt1 and ConExt1616.10 www.alnetsystems.com 2004-04-06
AS100V2(BNC) Hardware Manual(2) Insert the AS100V2(BNC) vertically into PCI slot from one side to the other andthen insert AudExt1 and ConExt1616 in the same way. Check if the cards werewell inserted into PCI slot.(3) Connect a pin of watchdog 2pin connector of AS100V2(BNC) to the reset switchof mother board by 2pin cable. And then connect the other pin of watchdog 2pinconnector to the reset cable of PC case. Hardware installation of capture cardfinished.IV. Cable Connection(1) External Monitor Output Terminal (J8)External monitor output terminal (RCA Jack) is connected to external monitor.2004-04-06 www.alnetsystems.com 11
Page 1 and 2: AS100V2Hardware Manual
Page 3 and 4: NCP100V2(BNC) Hardware ManualManual
Page 5 and 6: NCP 30001. Product Overview1.1 Over
Page 7 and 8: AS100V2(BNC) Hardware Manual2.3 Wat
Page 9 and 10: AS100V2(BNC) Hardware Manual3.2 Cap
Page 11 and 12: AS100V2(BNC) Hardware Manual3.3 How
Page 13: AS100V2(BNC) Hardware Manual5. Opti

AS100V2 - Alnet Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?