PENTAGRAM Cerberus [P 6361] Quick Guide

PENTAGRAM Cerberus [P 6342] / [P 6343]Connecting computers to the CerberusComputers and other network devices can be connected to the Cerberus in two ways asdescribed below.Wired connections (LAN interface)All Ethernet (LAN) ports on the router support Auto-MDIX functionality, which enables anddisables crossover automatically, as required. With the autonegotiation feature, the routeralso automatically selects the highest connection speed available. For 10/100 Mbpstransfers, a Cat. 5 twisted-pair cable is required, terminated with RJ-45 connectorsaccording to TIA/EIA-568-A/B. One end of the cable should be connected to a computer’snetwork adapter, and the other to one of the router’s LAN ports. If the connection is correct,the LED indicator corresponding to the LAN port will light up.Wireless connections (WLAN interface)In order to connect a computer to the Cerberus using a wireless network, the WLAN adaptermust be installed correctly in the system, and the router must be located within theoperating range of the wireless adapter and belong to the same subnet.EN7