Geared motors

Drive dimensioningMotor versionsConfiguration aid2Option Function Possible applicationsCooling Separate fan Operation at rated torque ˘Wide operational speed rangeat low speedswith rated torqueMotor protection Thermal contact Protects the motor against ˘Monitoring the motor winding temperatureNC contact thermal overload ˘Switching a motor relayTemperature sensor Protects the motor against ˘PTCs operate in conjunction with aPTC thermistor/PTC thermal overload control unit˘Unlike the thermal contact, can bereset quickly.Continuous Protects the motor against ˘Measuring the temperature of the motor windingtemperature sensor thermal overloadKTYMotor connection ICN Geared motor connection ˘The motor can be replaced/dismantledconnector via a pluggable connector more quickly and easilyHolding systems Spring-operated Brakes the motor ˘Decelerating loadsbrake˘Holding loads˘Braking torque available in de-energisedstateAdditional Condensation Drains ˘Operation in extreme climaticoptions drain hole condensation conditions˘Outdoor installationProtection cover Protects against foreign matter ˘Protecting the air inlet opening againstfalling into the fan coverforeign matter if the drive is installed verticallywith the motor shaft downwards2-22 G-motion const en 11/2004