Stone Guard/UnderbodyStone Chip ProtectorRubber Guard andLow VOC Rubber GuardAn easy-to-spray under-paint coating thatprotects underbody panels from stone chipsand road debris damage.• Quick drying• Paintable• Light orange peel texture• No messy cleanup• Stone Guard is great for lower door skins,rocker panels, trunks, rear quarter panelsand underbody• Aerosol available in three colors• Underbody Stone Chip Protector is greatfor underbody protection• Shutz can available in two colorsCorrosion Protection 6DescriptionKit: 4 – KT14767 Black Underbody Stone Chip Protectorand 1 – Siphon Gun P30025Kit: 4 – KT14768 Gray Underbody Stone Chip Protectorand 1 – Siphon Gun P30025PartNo.KL141KL142DescriptionBlack, 20 Oz. Aerosol CanGray, 20 Oz. Aerosol CanBeige, 20 Oz. Aerosol CanBlack, 29 Oz. Shutz CanGray, 29 Oz. Shutz CanorBUYindividuallyPartNo.KT11001KT11002KT11003KT14767KT14768A synthetic rubber-based coating formulated to withstandabrasion, temperature extremes and exposure to sun,water, ice and snow.ApplicationsRe<strong>com</strong>mended for wheel wells, door skins,trunk area and seams.PerformanceCharacteristics• Tough and quick-drying• Matches OEM color, finish and texture• No CFCs• Easy-to-use aerosol can available in two formulations• Easily paintable• Provides excellent coating that withstands abrasion andcreates an excellent sound deadener• Ford Tox No. 154263 (P50086)• Siphon Spray Gun provides convenient, easy application– for use with 1 quart cansDescriptionLow VOC24 Oz. Aerosol Can, 12/CaseLow VOC1 Quart Shutz CanKit: 4 – KT14796 Rubber Guardand 1 – Siphon Gun P30025*Fits P30025 and KT13631PartNo.KT14912KT14796KL208
Chem-Weld E-PChem-Weld I A specially formulated two-part repair <strong>com</strong>pound for thermoplastic automotive body panelssuch as TPO, polypropylene, olefin-based plastics including EPDM, and similar substances.ApplicationsSuitable for rigid semi-plastic fenders, bumper covers, body panels, exterior trim, fenderextensions, roofs, deck lids, trim moulding, consoles and armrest supports.Performance Characteristics• Designed for all thermoplastics• No special preparation or adhesion promoters• 100% solids – no solvents or VOCs• Eliminates need to identify type of plastic• Will not crack, pinhole or shrink• No isocyanates• Excellent adhesion in 20 minutes• Sands and feathers in 15 minutes – paintable inless than 30 minutesPartDescriptionNo.10 Fl. Oz. Dual Cartridge with Two Turbo Mixers P10615Four Cartridges with Applicator GunP68471.7 Oz. Job Size P10641Four 1.7 Oz. Job Size with Applicator Gun P6812Two-part plastic repair <strong>com</strong>pound for repairing flexible plastics.ApplicationsFor all flexible interior and exterior parts.Performance Characteristics• No adhesion promoters or special preparation required• 100% solids – no VOCs• Makes durable long-lasting repairs in all types of flexiblethermoset plastic – will not crack or pop out• Sands and feathers in 15 minutes – paintable in lessthan 30 minutes• No solvents – won’t shrink, crack or bubble paintDescription10 Fl. Oz. Dual Cartridge withTwo Turbo MixersFour 10 oz. Cartridges withApplicator GunPartNo.P10531P6834<strong>Kent</strong>-GlazePolygrit Plastic Repair 7A specially formulated flowable glazing putty for flexible and semi-rigidthermoset and thermoplastic body panels.ApplicationsUse to fill abrasions, gouges, scratches and other cosmetic damage. Also usedto fill pin holes and sand scratches in Chem-Weld repairs.Performance Characteristics• No special preparation or adhesion promoter• Four-minute work life• Cures quickly – sandable in 15 minutes• Paintable in less than an hour• Will not shrink, crack or bubble paint• No VOCs• Speeds minor repairs• Ideal product to finish off Chem-Weld I , II and E-P repairsPartDescriptionNo.<strong>Kent</strong>-Glaze 16 Fl. Oz. with HardenerP91008Mild, water-based abrasive specially formulated to quicklyclean and scuff bare and painted plastic or metal parts.ApplicationsPreparing all types of plastic <strong>com</strong>ponentsfor subsequent repair and/or painting.Removes caked-on dirt, road film andwater-soluble soils and gloss from paints,plastics and clearcoats for better adhesion.Performance Characteristics• Universal formula• Improves adhesion of <strong>Kent</strong> repair material, paint and primers• Will not swell, distort or damage plastic parts• Leaves no residue• No chlorinated solventsor isocyanates* Not available in CaliforniaPartDescription No.12 Fl. Oz. Flip-Top Bottle P10642