SAVE 30% - Kent-Automotive.com

Chem-Weld E-PChem-Weld I A specially formulated two-part repair compound for thermoplastic automotive body panelssuch as TPO, polypropylene, olefin-based plastics including EPDM, and similar substances.ApplicationsSuitable for rigid semi-plastic fenders, bumper covers, body panels, exterior trim, fenderextensions, roofs, deck lids, trim moulding, consoles and armrest supports.Performance Characteristics• Designed for all thermoplastics• No special preparation or adhesion promoters• 100% solids – no solvents or VOCs• Eliminates need to identify type of plastic• Will not crack, pinhole or shrink• No isocyanates• Excellent adhesion in 20 minutes• Sands and feathers in 15 minutes – paintable inless than 30 minutesPartDescriptionNo.10 Fl. Oz. Dual Cartridge with Two Turbo Mixers P10615Four Cartridges with Applicator GunP68471.7 Oz. Job Size P10641Four 1.7 Oz. Job Size with Applicator Gun P6812Two-part plastic repair compound for repairing flexible plastics.ApplicationsFor all flexible interior and exterior parts.Performance Characteristics• No adhesion promoters or special preparation required• 100% solids – no VOCs• Makes durable long-lasting repairs in all types of flexiblethermoset plastic – will not crack or pop out• Sands and feathers in 15 minutes – paintable in lessthan 30 minutes• No solvents – won’t shrink, crack or bubble paintDescription10 Fl. Oz. Dual Cartridge withTwo Turbo MixersFour 10 oz. Cartridges withApplicator GunPartNo.P10531P6834Kent-GlazePolygrit Plastic Repair 7A specially formulated flowable glazing putty for flexible and semi-rigidthermoset and thermoplastic body panels.ApplicationsUse to fill abrasions, gouges, scratches and other cosmetic damage. Also usedto fill pin holes and sand scratches in Chem-Weld repairs.Performance Characteristics• No special preparation or adhesion promoter• Four-minute work life• Cures quickly – sandable in 15 minutes• Paintable in less than an hour• Will not shrink, crack or bubble paint• No VOCs• Speeds minor repairs• Ideal product to finish off Chem-Weld I , II and E-P repairsPartDescriptionNo.Kent-Glaze 16 Fl. Oz. with HardenerP91008Mild, water-based abrasive specially formulated to quicklyclean and scuff bare and painted plastic or metal parts.ApplicationsPreparing all types of plastic componentsfor subsequent repair and/or painting.Removes caked-on dirt, road film andwater-soluble soils and gloss from paints,plastics and clearcoats for better adhesion.Performance Characteristics• Universal formula• Improves adhesion of Kent repair material, paint and primers• Will not swell, distort or damage plastic parts• Leaves no residue• No chlorinated solventsor isocyanates* Not available in CaliforniaPartDescription No.12 Fl. Oz. Flip-Top Bottle P10642