download - Sport Compact Only

Step #3• Install the passenger side Comptech air boxmounting bracket to the chassis using thesupplied 6mm x 12 bolt. It is the longer ofthe two studded brackets.Install bracketStep #4• Install the New Comptech Air box lower (withoutthe air horn or top on) down into the car, Liningthe box up on the stud in the bracket you installedin step #3.• Install the washer and lock nut on the stud, snugit up, but do not tighten.• Install the driver’s side mounting bracket into theside of the box and secure it to the box using thesupplied washer and nut.• Using the new 6mm x 12 bolt from the kit, securethe lower part of the bracket to the chassis,but do not tighten.Step #5• From the bottom of the car install the new inletAir Horn on to the end of the main box and secureit to the newly installed bracket using thesupplied #56 hose clamp.• We recommend that you point the inlet as forwardas possible.• Once the Air Horn is clocked on to the main box,tighten up the hose clamp on to the bracket. Nowtorque the bolt that you left loose in step #2 thatsecures the bracket to the chassis to 22 lbf-ft.• Reinstall the front lower splash shield and reinstallthe right side inner fender that was removed instep #1. You can also lower the car back onto theground.3