maxicut 600 - Twose

5299 7. MAINTENANCE 0306MAINTENANCEBefore operating your rotary mower, make sure it is properly lubricated and thoroughly inspected. Onlya minimum of time and effort is required to regularly lubricate and maintain this machine to provide longlife and trouble free operation.WARNINGAlways disengage the PTO before raising the rotary mower for transporting or makingadjustments.LUBRICATION INFORMATIONDo not let excess grease collect on or around parts, particularly when operating in sandy areas. Theaccompanying illustration shows lubrication points. The chart gives the frequency of lubrication inhours, based on normal operating conditions. Severe or unusual conditions may require more frequentlubrication. Figure 1.Use an SAE multi-purpose, lithium-type grease for all locations shown except location no. 2. On centreand wing gearbox use recommended lubricant on following page. Be sure to clean the fittingthoroughly before using grease gun. Daily lubrication of the wing driveline slip joint is necessary.Failure to maintain proper lubrication will result in damage to U-joints, gearbox and/or driveshaft.Figure 1.7 - 1