Agilent E4438C ESG Vector Signal Generator - Advanced Test ...

Specifications for I/Q CharacteristicsI/Q adjustmentsSource Parameter RangeI/Q baseband inputsImpedanceI offset [600 Ω only]Q offset [600 Ω only]20 Hz to 100 kHz50 or 600 Ω± 5 V± 5 V(5 Hz to 0.9 MHz)I/Q baseband outputsI/Q offset adjustmentI/Q offset resolutionI/Q gain balanceI/Q attenuationI/Q low pass filter± 3 V1 mV± 4 dB0 to 40 dB40 MHz, throughRF outputI/Q baseband outputs 1Differential outputsSingle endedFrequency rangeOutput voltage into 50 ΩOutput impedanceI/Q offset adjustmentI/Q gain balanceI/Q attenuationI/Q quad skew[≤ 3.3 GHz][> 3.3 GHz]I/Q low pass filterI, I, Q, QI, QDC to 40 MHz [with sinewave](1.5 V P-P) [with sinewave]50 Ω, nominal± 50%± 4 dB0 to 40 dB± 10°± 5°2.1 MHz, 40 MHz, throughBaseband generator[arbitrary waveform mode][Option 601 or 602]Channels 2 [I and Q]Resolution 16 bits [1/65,536]Arbitrary waveform memoryMaximum playback capacity 8 megasamples (MSa)/channel [Option 601]64 MSa/channel [Option 602]Maximum storage capacity 1.2 GSa [Option 005]2.8 MSa [Standard]Waveform segmentsSegment lengthMaximum number of segmentsMinimum memory allocationWaveform sequencesMaximum total number of segment filesstored in the non-volatilefile system 16,384SequencingMaximum number of sequencesMaximum segments/sequenceMaximum segment repetitions 65,53660 samples to 8 or 64 MSa1,024 [8 MSa volatile memory]8,192 [64 MSa volatile memory]256 samples or 1 KB blocksContinuously repeating16,384 [shared with number of segments]32,768 [including nested segments]1. Parentheses denote typical performance.18