11.07.2015 Views

6(59,&( 0$18$/ km-900mah km-900mwh km-900mrh km-900mrh3 ...

6(59,&( 0$18$/ km-900mah km-900mwh km-900mrh km-900mrh3 ...

6(59,&( 0$18$/ km-900mah km-900mwh km-900mrh km-900mrh3 ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

SETTINGDip Switch Dip SwitchNo. 5 No. 6FREQUENCYOFF OFF every cycleON OFF every 2 cyclesOFF ON every 5 cyclesON ON every 10 cycles5) Freeze TimerCAUTIONAdjust to proper specification, or the unit may not operate correctly.Two new dip switches numbered 9 and 10 have been added to the improved “E”board to better prevent possible freeze ups. These settings come factory set to thedefault setting of 60 min. (OFF, OFF). Check the adjustment chart published in theTech Specs for proper settings. If the old board does not have these two dipswitches, (only 8 instead of 10), leave setting as OFF, OFF.SETTINGDip Switch Dip SwitchNo. 9 No. 10TIMEOFF OFF 60 min.ON OFF 70 min.OFF ON 50 min.ON ON 60 min.6) Bin ControlMODELS WITH THERMOSTATCAUTIONWhen the ambient temperature is below 45°F, the Bin Control Thermostatoperates to stop the icemaker even if the Ice Storage Bin is empty.When the Thermostat is set in the prohibited range, the icemaker operatescontinuously even if the Ice Storage Bin is filled with ice. Setting inthe prohibited range might cause severe damage to the icemaker resultingin failure.No adjustment is required under normal use, as the Bin Control is factory-adjusted.Adjust it, if necessary, so that the icemaker stops automatically within 10 seconds afterice contacts the Bin Control Thermostat Bulb.26

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!