The Profile System

Connectors1.2Connector selectionConnector types and materialsConnector Article-No. Technical dataStandard 1.21.2E0 material: 9 S Mn Pb 28Kstrength: 460-710 N/mm²surface: galvanisedStandard, ground 1.21.2E0 EStandard VA 1.21.2E0 V material: stainless steel 1.4305strength: 490-685 N/mm²surface: pickled and passivatedProcedureExample Connection Selection of connector-variant Standard Profile 1 Size of the profile in which the 30×30 mmconnector should be built into Core hole Determination of the core hole Ø Ø12 mm Profile 2 Determination of the connector- 40×40 mm /head according to slot-variant E-slotof the profile on which it will bejoined Connector Determination of connector 1.21.3E1 Number of Bent anchor:degrees determine the angle (0° - 45°)Special casesProfile Mounting PG for connec- Mounting PG for connecpositiontor selection position tor selection20×30 20 3030×50 30 5030×100 30 5090