The Profile System

Connectors for profiles with core hole-Ø 6 mm1.2AConnection variants with screw-type connectorsProfile with profile Profile to plate with thread Profile to plate with through-holeMounting instruction for screw-type connectors1. Screw anchor in until it stops against the shoulder2. Unscrew anchor until it lines-up with the cross bushing position (max. one turn)3. Set up profile with cross bushingConnection / Finished dimension PG thread Article-No.Connectorfor connectorsteelVAstandard EScrew-type20 M4×7 1.20.2S2M4/7front sidedM5×7 1.20.2S2M5/7M6×7 1.20.2S2M6/7VScrew-type parallel-square-cross-highE = ground-connector, VA = stainless steel 1.430592