Service Manual - The Expert - Dana Holding Corporation Product ...
Service Manual - The Expert - Dana Holding Corporation Product ...
Service Manual - The Expert - Dana Holding Corporation Product ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
�� If differential bearing cones are to be replaced,<br />
remove old bearings using a suitable puller. ���<br />
���������<br />
��������<br />
�����������������������������������������������<br />
����������������������������<br />
If any gears are to be replaced, they must be replaced in<br />
sets. Inspect thrust washers for scoring and excessive<br />
wear. Replace all worn or damaged parts�<br />
�� When it is necessary to remove ring gear from the<br />
differential case, carefully center punch each rivet<br />
head. Using a 9/16" drill bit, drill through rivet<br />
heads to depth shown. Next, use a rounded<br />
type punch to drive out remaining portion<br />
of the rivet.<br />
���������������������������������<br />
9<br />
DIFFERENTIAL DISASSEMBLY<br />
CORRECT PROCEDURE<br />
���� ���������<br />
�������������������������������������������������<br />
����������������������������<br />
������������������������������������������������<br />
���������������������������������������<br />
���������<br />
INCORRECT PROCEDURE<br />
����