High pressure housing - MTS Sensors

High Pressure HousingFor Temposonics ® R-Series Position SensorsATEX

Temposonics ® , HPHPrecision Position MeasurementHigh Pressure HousingThis High Pressure Housing is ATEX EEx as well as UL and cULapproved for use in hazardous locations with Temposonicsposition sensors.The ATEX, UL and cUL approvals cover flammable gases, vapors,liquids and dust.This housing is made to fit Temposonics G-Series and L-SeriesAnalogue + Start/Stop Sensors, R-Series sensors with analogue anddigital outputs. Both fixed cable and connector versions can be used.When using a standard sensor in this housing you get a cost efficientsolution for use in hazardous locations which also allows easysensor replacement.Several design combinations are available to fit your application:M18 or 3/4”UNF mounting flange thread - M20 or 1/2” NPT cablegland thread - long or short top-mounted, side-mounted or dualside-mounted cable glands. See combination chart.All parts are made of 316L stainless steel. The housing is also availablein non-approved versions ensuring an outstanding protection tothe sensor when used in rigged applications with high humidity andagressive gases.Protection type:ATEX:II 2 G Ex d IIC T5 Tamb -40°C to +60°CII 2 D Ex tD 20/A21 IP68 T 100°CITS09ATEX16296XIn accordance with EN 60079-0:2006EN 60079-1:2007, EN 60079-26:2004,EN 60079-0:2006 and EN 61241-1:2004Only with ATEX approved cable glandsClass 1, Devision 1, Groups A, B, C, and D hazardouslocations, temperatur code T5As to fire, electrical shock and explosion hazards onlyUL certificated no. 2PD0.In accordance with UL 1203 standard.Only with UL approved cable glandsMaterial: Stainless steel AISI 316L (1.4404)Cable gland threads:M20 x 1,5 or 1/2” NPTIngress protection code: IP68 (only with IP68 approved cable gland)Approved sensors:G-Series Analogue+DigitalL-Series Start/StopR-Series AnalogueR-Series ProfibusR-Series CANBUSR-Series SSIR-Series DeviceNetMounting flange:M18 x 1,5 or 3/4” - 16UNF - 3APressure rating:350 barPeak pressure:530 barMagnet typ:Ring magneteLevel Measurement:Float on requestOperating temperature: -40°C ... +60°C (Basis T5)Short Housingwith top-mountedcable glandLong housingwith top-mountedcable glandShort housingwith side-mountedcable glandLong housingwith dual side-mountedcable gland

Temposonics ® , HPHCombination chartBottomTopApproval ATEX ATEX ATEX UL and cUL ATEX01000900 1000 ATEX 1000 UL/cUL 130003002100Ordering Information:Part No.Choose a design combination from the chart belowHPH -XXXX-XXXX-X-XXXXXXExample: Aprroved short housing with M18 mountingthreads and one side mounted cable gland with N20threads and a measuring length of 650 mm:HPH-0900-0650-AMeasuring length (see drawing on opposite side)A - Approved versionN - Non approved versionFor version 1000 please add type of approval- ATEX- UL/cULAccessoriesDescription Part No. Type No.M20 x 1,5 cable gland, ATEX 3-15 mm cable diameter, nickel plated brass CG-912004 ADL1F-6M20 x 1,5 cable gland, ATEX 4-8,5 mm cable diameter, stainless steel CG-816679 ADE1F-4M20 x 1,5 cable gland, ATEX 8,5 - 16 mm cable diameter, stainless steel CG-816609 ADE1F-61/2” NPT cable gland ATEX/CSA US, 180°C 4,0 - 8,4 mm cable diameter, nickel plated brass 403 042 A3LF/16 1/2 NPTStainless steel nut fo flange M18 x 1,5Spanner toolDIN 1018A AMF 80-90 mmRing magnet OD 33 201 542-2Sensors with Analogue, Start/Stop or CANbus output:6 pin female connector M16 370 4236 pin female connector M16 with 10 m PUR-Cable 370 423 / 10m 530 052Sensors with SSI output:7 pin female connector M16 370 6247 pin female connector M16 with 10 m PUR-Cable 370 624 / 10m 530 052HPH rotation adapter for M18, M30x1,5RTA-M18HPH rotation adapter for 3/4” UNF; 1 1/16 3/4” UNF; 1 1/16-2

Temposonics ® , HPHHPH Rotation AdaptorThis adaptor allows you to adjust the position of the side opening when the HPH Housing ismounted in a cylinder. Pressure tested to 600 bar/8400 psi.RTA-M18 is for use with the standard M18 housing thread and has a M30x1,5 mounting threadand the RTA-3/4” UNP is for use with the 3/4” UNF housing thread and has a 1 1/16” UNFMounting thread.

www.mtssensor.comTemposonics ® Hotline: +49 2351-9587-6000Mo-Fr 8 am -7 pm / Sa 8 am -12 pmDocument Part Number: HPH 17032010eMTS and Temposonics ® are registered trademarks of MTS Systems Corporation. All other trademarks arethe property of their respective owners. Printed in Germany.Copyright © 2013 MTS Sensor Technologie GmbH & Co. KG. Alterations reserved. All rights reserved in allmedia. No license of any intellectual property rights is granted. The information is subject to change withoutnotice and replaces all data sheets previously supplied. The availability of components on the market is subjectto considerable fluctuation and to accelerated technical progress. Therefore we reserve the right to altercertain components of our products depending on their availability. In the event that product approbations orother circumstances related to your application do not allow a change in components, a continuous supplywith unaltered components must be agreed by specific contract.MTS Sensor TechnologieGmbH & Co. KGAuf dem Schüffel 958513 Lüdenscheid, GermanyTel. + 49-23 51-95 87 0Fax + 49-23 51-5 64 91E-Mail: info@mtssensor.dewww.mtssensor.deMTS Systems CorporationSensors Division3001 Sheldon DriveCary, N.C. 27513, USATel. + 1-919-677-0100Fax + 1-919-677-0200E-Mail: sensorsinfo@mts.comwww.mtssensors.comMTS Sensors Technology Corp.737 Aihara-cho,Machida-shi, JapanTel. + 81-42-775-3838Fax + 81-42-775-5516E-Mail: info@mtssensor.co.jpwww.mtssensor.co.jp